690858
8
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
14 15
en
Initial operation and general information
The induction milk frother is intended for heating and frothing milk and milk substitutes. In general,
the following milk types can be used:
fresh milk, UHT milk (including from cows, sheep and goats) and lactose-free milk as well as milk
substitutes (such as soya milk) with various fat contents.
The quality and volume of the milk foam depends on the type and characteristics of the milk being
used (e.g. the fat and protein content, temperature, etc.).
Prior to initial use, clean the device as described in the section entitled „Cleaning and care.“ Any sur-
plus length of the connecting cable can be wound around the bottom of the device‘s base (6). Connect
the mains plug to an earthed wall socket, the on/off button (7) lights up in red.
The WMF LONO Milk&Choc has four programmes:
Symbol Programme Application DISC Filling volume
Hot milk foam
This thick milk foam is
perfect for use with cap-
puccino or latte macchiato
drinks.
WMF Milk System
MIN 150 ml
MAX 350 ml
Cold milk foam
This cold, creamy milk foam
is especially well suited for
frappé drinks, cocktails, iced
coffee and desserts.
MIN 150 ml
MAX 350 ml
Hot milk
This programme provides a
quick and easy way to heat
milk, e.g. for latte coffees
or cups of warm milk.
MIN 150 ml
MAX 500 ml
Hot chocolate
Use this programme to
make hot chocolate drinks
using crumbled chocolate.
WMF Choc System
milk
MIN 150 ml
MAX 350 ml
chocolate
MAX 34 g
Preparing milk foam and hot milk:
Note: Use the WMF Milk System for this programme. (Fig. A)
Hold the WMF Milk System (3) by its handle and stand it vertically within the jug. A magnet then
holds the WMF Milk System (3) to the fl oor of the jug.
Fill the jug (5) with chilled milk, observing the MIN and MAX level indicators (see chart). Do not
exceed the indicated maximum, otherwise milk may slosh out during preparation.
Stand the jug (5) on the device base (6).
Place the lid (1) on the jug (5) and apply slight pressure to ensure that it seals. Ensure that the end
of the handle of the WMF Milk System (3) is positioned within the lid mechanism.
Now press the on/off button (7) repeatedly until the LED next to the symbol
of the
desired programme lights up.
Approx. 3 seconds later, the preparation begins automatically. The process may be interrupted at
any time by pressing the on/off button (7) again.
Once the programme has fi nished, the device switches off automatically and the programme light
go out. The on/off button (7) lights up in red.
Note: the device‘s fans may continue to run beyond the end of the programme.
The jug (5) can now be removed from the base (6). To pour out the contents, remove the lid (1) and
take out the WMF Milk System (3).
Caution: the jug and handle of the WMF Milk System may be hot!
Preparing hot chocolate:
Note: Use the WMF Choc System for this programme. (Fig B)
Hold the WMF Milk System (3) by its handle and stand it vertically within the jug. A magnet then
holds the WMF Milk System (3) to the fl oor of the jug.
Fill the jug (5) with chilled milk, observing the MIN and MAX level indicators (see chart). Do not
exceed the indicated maximum, otherwise milk may slosh out during preparation.
Stand the jug (5) on the device base (6).
Add crumbled chocolate to the milk. For optimal results, we recommend breaking the chocolate
into small chunks. Alternatively, you can use ground or powdered chocolate.
Place the lid (1) on the jug (5) and apply slight pressure to ensure that it seals. Ensure that the end
of the handle of the WMF Choc System (4) is positioned within the lid mechanism.
Press the on/off button (7) repeatedly until the LED next to the „Hot Chocolate“ symbol
lights
up.
Approx. 3 seconds later, the preparation begins automatically. The process may be interrupted at
any time by pressing the on/off button (7) again.
Once the programme has fi nished, the device switches off automatically and the programme light
go out. The on/off button (7) lights up in red.
Note: the device‘s fans may continue to run beyond the end of the programme.
The jug (5) can now be removed from the base (6). To pour out the contents, remove the lid (1) and
take out the WMF Choc System (4).
Caution: the jug and handle of the WMF Choc System (4) may be hot!
Warning: Always place the lid (1) on the device before switching it on. Never remove the lid (1) while
the device is running.
Note: Allow the device to cool down before reuse.
Clean the device and the WMF Milk&Choc System after each use.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Wmf LONO Milk and Choc - 13170011 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Wmf LONO Milk and Choc - 13170011 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info