774225
14
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
14
9. Do not let cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner, or in a heated oven.
11. Always attach plug to appliance first, then plug cord into wall outlet. To
disconnect, turn any control to OFF position, then remove plug from wall outlet.
12. Oversized foods or metal utensils must not be inserted in the appliance as they
may cause a fire or risk of electrical shock.
13. A fire may occur if the appliance is covered or touching flammable material
including curtains, draperies, walls and the like when in operation.
14. Do not clean with metal scouring pads. Pieces can break off the pad and touch
electrical parts, involving a risk of electrical shock.
15. Extreme caution should be exercised when using containers constructed of other
material other than metal or glass.
16. Do not store any materials other than manufacturers recommended accessories
in this unit when not in use.
17. Do not place any of the following materials inside the unit: Paper, cardboard,
plastic and the like.
Before first use…………………………………….
z All parts of the blender are to be thoroughly cleaned before being used for the
first time.
z Take out the required length of cable from the cable tidy on the base of the
blender and connect the device to the mains supply.
Assembling the Jar:
1. Put the rubber sealing ring (5) on the inner edge of the blade unit (6).
2. Put the blade unit with sealing ring into the cup base (7).
3. Inset the safety ring (4) on the bottom of jar first, then Insert the assembled cup
base onto the bottom of the jar and secure tightly.
4. Mount the jar(3) onto the cup base unit and tune the cup base unit, and turn
clockwise until jar locks into place.
5. Mount the Measure Cup (1) onto the Lid (2).
6. Secure the Lid onto Jar and press down.
Inserting the Jar:
1. Make sure that the blender is switched off (Switch in the ‘0’ setting).
2. Place the jar assembly (9) on to the motor base (8) and press down until securely
engaged.
How to Use
1. Place the foodstuff you wish to process into the jar.
2. Put the lid on the jar and close securely. Place the measuring cap into the hole in
the lid and turn clockwise to lock.
3. Switch on the motor base:
4. NB: Operate the motor for a maximum of 60 seconds or alternating 60
seconds on, then 60 seconds off to prevent overheating or consequent
damage.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Wilfa BL-2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Wilfa BL-2 in de taal/talen: Engels, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 0.75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info