727524
13
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
13
Troubleshooting and Tips
Problem Possible Causes Solutions
Ice cream maker churning
blade not working
Mixture is too hard Power off the unit and wait for the mix-
ture to be soften
Ice cream maker does not
freeze
Room’s ambient temperature is
too high
Ice cream mixture temperature is
too warm
The volume of the mixture is more
than required measurement
Choose a well-ventilated area with
temperatures above 60°F (16°C) and
below 90°F (32°C)
Use refrigerated mixture and make
sure that your pre-mixture does not go
over top dasher of the churn blade
Ice cream maker compressor
does not run when operation
of the unit has been resumed
The ice cream maker has entered
a three minute compressor lockout
This three minute time delay helps ex-
tend the life of the compressor. Once
delay elapses, the compressor will en-
gage and the ice cream maker will start
cooling again
Contact Whynter Service Department
Ice cream is not firm enough
Ingredients were warm or at room
temperature before placing in the
bowl
The ice cream maker lid was
opened and closed too many times
during the freezing process.
The freezing bowl has a thick coat-
ing of ice on the walls.
Use refrigerated mixture that does not
go over top dasher of the churn blade
Refrain from opening the lid many
times
After washing, dry completely prior to
placing back in ice cream maker
Ice cream maker stops
churning before ice cream is
ready
Too much mix-in ingredients are
added causing the churn blade to
jam
Mix-in ingredients, such as choco-
late chips or chopped nuts, added
too soon
Wait until ice cream mixture is thick-
ened or frozen before adding ingredi-
ents
Ice cream too icy
Low-fat ice cream is being made
Too much water in the mixture
Sugar in the mixture is not dis-
solved
Use whole milk or buttermilk instead of
nonfat milk
Put the sugar on the fruit and let it melt
in the fruit's juices instead of using syr-
up
Make sure sugar is well-dissolved
Removable mixing bowl is
stuck
During shipping, due to pressure,
the mixing bowl may have been
suctioned into the freezing canister
To remove, firmly pull the bucket up
and out
Many common ice cream maker problems are easily resolved. Try the troubleshooting suggestions below to
see if the problems can be resolved before having to contact the Whynter Service Department.
Some user tips for your ice cream maker:
Our freezing bowl is approved for food safety. Since aluminum can react to acidic solutions, the recommenda-
tion is to not store acidic foods in the freezing bowl for long periods. We recommend removing any acidic frozen
mixtures from the freezing bowl and store them in plastic containers.
Please note that our ice cream makers are a self-contained, compressor operated unit which no pre-freezing
and salt required. All you need to do is to put the refrigerated mixture into the removable mixing bowl and the
unit will freeze the mixture.
Optional: Freeze newly-made ice cream for about 4 hours before serving. This is also known as "ripening”
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whynter ICM-201SB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whynter ICM-201SB in de taal/talen: Engels als bijlage per email.

De handleiding is 1,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info