727495
11
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
11
CLEANING AND MAINTENANCE
To maintain the performance of the air purifier, cleaning unit regularly and replacing the filter when needed is
highly recommended.
1. To clean the sensor, make sure that the air purifier is switched
off.
2. Use a damp cotton swab and wipe the sensor, as shown.
3. Dry the sensor with the other end of the cotton swab.
REPLACING 2-in-1 ACTIVATED CARBON AND HEPA FILTER
The recommended change schedule for your 2-in-1 filter pack is every 4 to 6 months under normal air quality con-
ditions or when the icon illuminates on the control panel..
Note: The 2-in-1 ACTIVATED CARBON AND HEPA FILTER is not washable.
1. Power off the air purifier.
2. Remove the front cover and washable pre-filter.
3. Replace the used filter with a new 2-in-1 Activated Carbon Filter and HEPA filter. Re-attach the pre-
filter and replace front cover.
4. Plug in and turn on unit. Touch and hold the Sleep icon for 5 seconds to reset the Air Quality
Filter indicator. The Check Filter indicator will turn off, the Home icon will illuminate and normal
operation will resume.
5. Dispose of the used 2-in-1 Activated Carbon Filter and HEPA filter. Do not reuse or wash.
CLEANING THE PRE-FILTER
The Pre-Filter should be cleaned according to the level of pollution in the air of the room.
1. Remove the Pre-Filter from the air purifier.
2. Gently wash under lukewarm water for 2 to 3 minutes or until it is completely clean. Clean the Pre-Filter with
caution as the material is fragile. Rinse with clean tap water.
3. Use a towel to remove any excess water from the Pre-Filter and allow to dry for 12 to 24 hours.
4. When Pre-Filter is completely dry, place the Pre-filter back into the air purifier.
CLEANING THE PHOTOCATALYST FILTER
The Photocatalyst Filter should be cleaned every 6 months depending on the air quality.
Note: The Photocatalyst FIlter is not washable.
1. Remove the front cover and the 2-in-1 Activated Carbon Filter and HEPA filter.
2. Remove the Photocatalyst Filter and use a vacuum cleaner with a nozzle or brush attachment on a
lower power setting to clean the dirt and dust from the filter.
REPLACING THE UV BULB
The UV bulb should be replaced every 6,000 working hours. This is indicated by the blinking of the UV Bulb icon
on the control display. Please contact Whynter Service Department for purchase information of a new UV Bulb.
CLEANING THE AIR PURIFIER
The surface of the air purifier should be cleaned at least once a month or more often depending on the air quality.
1. Use a clean, dry cloth to wipe the external surfaces.
2. Use a damp cloth to remove stubborn stains and dirt build up.
3. Clean the air inlets and outlet with a dry cloth or a vacuum cleaner.
CLEANING THE AIR QUALITY SENSOR
The Air Quality Sensor can be located on the right side of the unit. For best performance, clean the sensor each
time you replace the 2-in-1 Activated Carbon and HEPA Filter.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whynter AFR-425-PW-SW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whynter AFR-425-PW-SW in de taal/talen: Engels als bijlage per email.

De handleiding is 5,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info