304248
12
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
29
a. Water inlet fault (no or insufficient water supply)
For models with a fault display, the “Water tap”
indicator is on or the display alternately shows
“FH”. Switch off the appliance by turning the
programme selector to the “ ” position and
unplug it.
For models with no fault display, the washing
machine stops in the appropriate step. Switch off
the appliance and unplug it.
Check whether:
the water tap is completely open, and the water
supply pressure is sufficient;
the water inlet hose is kinked;
the mesh filters are blocked (see “Care and
Maintenance” / “Water Hose Mesh Filters”);
the water inlet hose is frozen.
Reconnect the appliance to the electrical supply.
For models with a fault display, reselect the
desired programme and press the “Start/Pause”
button again to continue with the programme (do
not add detergent for this programme).
For models without a fault display continue the
programme by pressing the “On/Off” button again
(do not add detergent for this programme).
If the fault re-occurs, contact After-Sales Service
(see “After-Sales Service”).
b.Draining out fault
For models with a fault display, depending on the
model, the display shows statically or alternately
“FP”. Switch off the appliance by turning the
programme selector to the “ ” position and
unplug it.
For models with no fault display, the washing
machine stops in the appropriate step. Switch off
the appliance and unplug it.
Check whether:
the drain hose is kinked (see “Installation
Guide”);
the pump / filter are blocked (see “Removing the
Filter / Draining Residual Water”);
IMPORTANT: before draining, allow the wash water
to cool down.
the drain hose is frozen.
Connect the appliance to the electrical supply.
For models with a fault display reselect the desired
programme and press the “Start/Pause” button
again to continue with the programme (do not add
detergent for this programme).
For models without a fault display continue the
programme by pressing the “On/Off” button again
(do not add detergent for this programme).
If the fault re-occurs, contact After-Sales Service
(see “After-Sales Service”).
c. Electrical module fault
For models with a fault display “F4” to “F15” are
displayed and some or all Spin Speed Selection
LEDs are flashing. Switch off the appliance. Select
a programme and press the “Start/Pause” button
once again. The programme will continue.
For models without a fault display the washing
machine stops in the appropriate step. Switch the
appliance first off, then on. The programme will
continue.
If the fault re-occurs, contact After Sales Service
(See “After-Sales Service”).
d.Water Stop fault (if available)
The “Water Stop” may have been triggered by:
1.too much foam.
2.a leak in the inlet hose or in the appliance.
In this case the pump is switched on
automatically in order to pump the water out.
For models with a fault display the light of the
“Water Stop” indication is on. The display shows
“FA or alternately “F” and “A” and the pump is
running. Switch off the appliance by turning the
programme selector to the “ ” position, unplug
the appliance and make sure that the water tap is
closed.
For models without a fault display the washing
machine stops in the appropriate step. Switch off
the appliance, , unplug the appliance and make
sure that the water tap is closed.
Tilt the appliance forwards carefully to allow the
collected water to flow out.
Then:
1.plug in the appliance,
2.turn the water tap on (if water immediately
flows into the appliance again, without the
appliance being started, close water supply and
call After-Sales Service).
For models with a fault display reselect the desired
programme and press the “Start/Pause” button
again to continue with the programme (do not add
detergent for this programme).
For models without a fault display continue the
programme by pressing the “On/Off” button again
(do not add detergent for this programme).
If the fault re-occurs, contact After-Sales Service
(see “After-Sales Service”).
12

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Whirlpool-magic-1000

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whirlpool magic 1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whirlpool magic 1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Whirlpool magic 1000

Whirlpool magic 1000 Specificaties - Nederlands - 2 pagina's

Whirlpool magic 1000 Gebruiksaanwijzing - Nederlands - 13 pagina's

Whirlpool magic 1000 Snelstart handleiding - Deutsch - 2 pagina's

Whirlpool magic 1000 Gebruiksaanwijzing - Deutsch - 15 pagina's

Whirlpool magic 1000 Snelstart handleiding - English - 2 pagina's

Whirlpool magic 1000 Snelstart handleiding - Français - 2 pagina's

Whirlpool magic 1000 Gebruiksaanwijzing - Français - 13 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info