333542
4
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
16
INSTALLATION - TECHNICAL INFORMATION FOR THE
INSTALLER
Before installing the cooktop, make sure that the local
distribution conditions (gas nature and pressure) and the
adjustment of this appliance are compatible. The appliance
adjustment values are indicated on the rating plate or label.
Gas supply
- The cooktop is set to work with the gas indicated on the rating
plate.
- The gas supply system must comply with local regulations.
- To connect the cooktop to the gas mains or cylinder, use a
fixed metal pipe or a flexible stainless steel hose in compliance
with local regulations.
The flexible metal tube must be no more than 2 m long.
Attention:
If a flexible stainless steel hose is used, it must be
installed in such a way that it cannot come into contact with a
mobile part of the unit, it is not obstructed and it can
be inspected along its whole length.
The cooktop connection is made using the following:
- 1 nut
(A)
- 1 gasket
(F)
- 1 conical union elbow
(C)
.
Important:
- Never force the turning of union (C) without first
slackening nut (A).
- The gasket (F) guarantees the seal of the gas connection.
Replace it when worn or damaged. The gasket must comply
with local standards.
- After the connection, check for leaks with a soapy
solution. Never use flames.
Replacing the gas burner injectors
To replace the injectors, please refer to the Injector Table, in
the separate Product Description Sheet.
Remove the grids and extract the burner bodies.
With a spanner, replace nozzles
(J)
with the nozzle suitable
to the gas to be used.
Adjusting the gas burner minimum
For taps with adjusting screw inside the shaft:
- with a screwdriver, max. diameter 3 mm, turn the screw inside
the tap shaft until adjustment is correct.
- perform the adjustment with the tap in the minimum position
(small flame ).
- For taps with adjusting screw on the body:
- with a screwdriver turn screw
(A)
until adjustment is correct.
- In models with ignition incorporated in the knob, access
screw
(A)
through a hole in the microswitch.
- Perform the adjustment with the tap in the minimum position
(small flame ).
For Gas G30/G31 tighten the adjusting screw completely.
Correct flame adjustment
Make sure that the appearance of the flame is stable and even. Also
make sure that when turning from the max opening position to the
min opening position, the flame does not go out.
Gas tap lubrication
If a gas tap is difficult to turn, disassemble and clean it
carefully with petrol and spread special high-temperature
resistant grease on it.
These operations must be performed by a qualified technician.
conical
3gb66016.fm Page 16 Monday, August 19, 2002 11:59 AM
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whirlpool akr 021 ix bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whirlpool akr 021 ix in de taal/talen: Engels als bijlage per email.

De handleiding is 0,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Whirlpool akr 021 ix

Whirlpool akr 021 ix Gebruiksaanwijzing - Nederlands - 19 pagina's

Whirlpool akr 021 ix Gebruiksaanwijzing - Deutsch - 9 pagina's

Whirlpool akr 021 ix Snelstart handleiding - English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info