650696
7
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
7
EN
fuse cover.
3. Ret both into plug.
Important:
The fuse cover must be retted
when changing a fuse and if
the fuse cover is lost the plug
must not be used until a cor-
rect replacement is tted.
Correct replacement are identi-
ed by the colour insert or the
colour embossed in words on
the base of the plug.
Replacement fuse covers are
available from your local elec-
trical store.
For the Republic of Ireland
only
The information given in
respect of Great Britain will fre-
quently apply, but a third type
of plug and socket is also used,
the 2-pin, side earth type.
Socket outlet / plug (valid for
both countries)
If the tted plug is not suitable
for your socket outlet, please
contact After-sales Service for
further instruction. Please do
not attempt to change plug
yourself. This procedure needs
to be carried out by a qualied
technician in compliance with
the manufactures instructions
and current standard safety
regulations.
CORRECT USE
Do not exceed the maximum
load allowed. Check the maxi-
mum load allowed in the pro-
gramme chart.
Do not dry unwashed items in
the tumble dryer.
Do not overdry the laundry.
If the power cable is damaged
it must be replaced with an
identical one. The power cable
must only be replaced by a
qualied technician in compli-
ance with the manufacturer
instruction and current safety
regulations. Contact an author-
ized service centre.
Do not operate this dryer if it
has a damaged mains cord or
plug, if it is not working prop-
erly, or if it has been damaged
or dropped. Do not immerse
the mains cord or plug in wa-
ter. Keep the cord away from
hot surfaces
The electrical components
must not be accessible to the
user after installation.
Do not touch the dryer with
any wet part of the body and
do not operate it when bare-
foot.
ELECTRICAL CONNECTION
FOR GREAT BRITAIN AND
IRELAND ONLY
Fuse replacement.
If the mains lead of this dryer is
tted with a BS 1363A 13amp
fused plug, to change a fuse in
this type of plug use an A.S.T.A.
approved fuse to BS 1362 type
and proceed as follows:
1. Remove the fuse cover (A)
and fuse(B).
2. Fit replacement 13A fuse into
If, due to lack of space, the
dryer must be installed directly
next to a gas or coal stove, a
heat insulating plate (85 x 57 cm)
must be installed in between
and the side of the plate fac-
ing the stove must be covered
with aluminium foil.
The dryer is not designed for
built-in installation.
The dryer can be installed un-
der a worktop, provided that
adequate ventilation of the
dryer is assured. Install a ven-
tilation grid (minimum 45 cm
x 8 cm), in the rear part of the
worktop under which the dryer
is installed.
ELECTRICAL WARNINGS
Make sure the voltage speci-
ed on the rating plate corre-
sponds to that of your home.
For installation to comply with
current safety regulations, an
omnipolar switch with mini-
mum contact gap of 3mm is
required.
Regulation require that the
dryer is earthed.
For dryers with tted plug, if
the plug is not suitable for you
socket outlet, contact a quali-
ed technician.
Do not use extension leads,
multiple sockets or adapters.
Do not connect the dryer to a
socket which can be operated
by remote control.
The power cable must be long
enough for connecting the
dryer, once tted in its hous-
ing, to the main power supply.
Do not pull the power supply
cable.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whirlpool HSCX 90430 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whirlpool HSCX 90430 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Whirlpool HSCX 90430

Whirlpool HSCX 90430 Snelstart handleiding - English - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info