540479
4
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
67
Customizable Rotational Stop (CRS)
Vortex Viper PST riflescope elevation turrets incorporate the
unique CRS rotation stop feature. After the rifle is sighted in,
the design of the CRS allows a shooter to quickly and easily
return to an original zero point when using the elevation turret
to dial-in temporary bullet drop corrections.
The CRS feature is particularly useful when dialing large
multi-revolution elevation corrections. Without this feature,
the shooter must pay very careful attention when dialing these
large corrections. If the shooter loses track of the number of
revolutions, the original zero point may become lost when
returning the adjustment.
Viper PST riflescopes equipped with
the CRS allow the elevation dial to be quickly spun back to
original zero without having to carefully count revolutions or
clicks.
Once the CRS shims are installed after sight-in, the elevation
dial will stop turning shortly past the original zero point when
being returned (turning clockwise direction) from a temporary
elevation adjustment. The shooter can then turn the elevation
knob a partial turn in a counter-clockwise direction until the
zero reference and radius bar are correctly alignedachieving
the original zero point.
See CRS shim installation in the
Bore Sighting and Final Range
Sight-in sections.
CRS Shims
This Viper PST riflescope does not have a parallax focus.
The focus is factory pre-set at a distance of 100 yards.
About Parallax
Parallax is a phenomenon that results when the target
image does not quite fall on the same optical plane as the
reticle within the scope. When the shooter’s eye is not
precisely centered in the eyepiece, there can be apparent
movement of the target in relation to the reticle, which can
cause a small shift in the point of aim. Parallax error is most
problematic for precision shooters using high magnification.
At distances over 100 yards parallax error is minimal; using
good consistent shooting form and cheek weld will prevent
most error problems with parallax.
Subtension
Multiplier Markings
Magnification
Markings
MagView
Variable Power Adjustments
To change magnifications, turn the magnification
ring to the desired
level. The patented
Vortex MagView
will provide a low
light reference
for magnification
level.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vortex Viper PST bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vortex Viper PST in de taal/talen: Engels als bijlage per email.

De handleiding is 0,44 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info