654392
3
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
OPERATING INSTRUCTIONS
Version 01/13
USB Data Logger
Item No. 10 50 56 DL-101T Temperature
Item No. 10 50 57 DL-121TH Humidity / Temperature
INTENDED USE1.
The battery-operated, compact data logger DL-101T has an internal temperature sensor, the DL-121TH
additionally an air humidity sensor. The measuring data is recorded automatically at adjustable intervals from 2 s
up to 24 h. At most 32,000 measuring values (with the DL-121TH 16,000 each for temperature and air humidity)
can be saved. This enables data recording over several years.
A space-saving installation via wall mount is also possible. The data logger is connected to a computer like a
standard USB data carrier and read there. Data is evaluated graphically with an evaluation program. Data export
for table evaluation is also possible. In addition, the recorded data can be saved for further processing.
A long-life lithium battery supplies the power. This ensures a very long recording time.
With attached protective cap, the product is spray water-protected and can be used indoors and outdoors. It is
not authorized to use the device if the housing is not completely shut.
The data logger must not be operated when it is open, i.e. with an open battery compartment or when the battery
compartment cover is missing. Measuring under adverse ambient conditions like dust and ammable gasses,
vapours or solvents is not admissible. The safety instructions must be followed unconditionally!
This product fulls European and national requirements related to electromagnetic compatibility (EMC).
CE conformity has been veried and the relevant statements and documents have been deposited at
the manufacturer.
Unauthorised conversion and/or modication of the device are inadmissible because of safety and approval
reasons (CE). Any usage other than described above is not permitted and can damage the product and lead to
associated risks such as short-circuit, re, electric shock, etc. Please read the operating instructions thoroughly
and keep them for further reference.
CONTENT OF DELIVERY2.
Data logger
Lithium battery
Wall mount with attachment material (do not use the adhesive pad below 5 °C)
CD with software (for Windows® 98/2000/XP/Vista)
Operating instructions
SAFETY INSTRUCTIONS3.
We do not assume liability for resulting damages to property or personal injury if the
product has been abused in any way or damaged by improper use or failure to observe
these operating instructions. The warranty/ guarantee will then expire!
The icon with exclamation mark indicates important information in the operating instructions.
Carefully read the whole operating instructions before operating the device, otherwise there
is risk of danger.
Personal safety
The product is not a toy and should be kept out of reach of children! Position it outside the range
of children as it contains small parts and batteries.
Do not leave packaging material unattended. It may become a dangerous toy for children!
Product safety
When used in conjunction with other devices, observe the operating instructions and safety
notices of connected devices.
The product must not be subjected to heavy mechanical stress.
Handle the product carefully and do not drop it. Knocks, blows or even a fall from a low height
can damage it.
The product must not be exposed it to extreme temperatures, direct sunlight, intense vibration,
or dampness.
Do use the device in rooms or at unfavourable ambient conditions in which there may or could
be combustible gases, vapours or dust. Avoid an operation near:
strong magnetic or electromagnetic elds -
transmitting aerials or HF generators -
since this could affect the measurement.
Battery safety
Batteries must be kept out of the reach of children.
Correct polarity must be observed while inserting the batteries.
Batteries should be removed from the device if it is not used for a long period of time to avoid
damage through leaking. Leaking or damaged batteries might cause acid burns when in contact
with skin, therefore use suitable protective gloves to handle corrupted batteries.
Do not let batteries/rechargeable batteries lie around openly. There is a risk of batteries being
swallowed by children or pets. If swallowed, consult a doctor immediately.
All the batteries should be replaced at the same time. Mixing old and new batteries in the device
can lead to battery leakage and device damage.
Batteries must not be dismantled, short-circuited or thrown into re. Never recharge non-
rechargeable batteries. There is a risk of explosion!
Miscellaneous
Repair works must only be carried out by a specialist/ specialist workshop.
If you have queries about handling the device, that are not answered in this operating instruction,
our technical support is available under the following address and telephone number: Voltcraft
®
,
92242 Hirschau, Lindenweg 15, Germany, phone 0180 / 586 582 7
OPERATING ELEMENTS4.
1 Protective cap
2 USB connection plug
3 ALM display (LED yellow/red)
4 REC display (LED green)
5 Rubber seal
6 Integrated battery compartment
7 Sensor openings
8 Button on the rear
INITIAL OPERATION5.
The data loggers are protected against spray water with a protective cap and a rubber seal. This protection
allows permanent logging operation also in damp rooms or outdoors.
The protective cap must be removed for changing the battery or reading the saved data via a computer.
Pull the transparent cap off the device. The protective cap has a tight t on the data logger due to the rubber
seal. Twist the protective cap carefully back and forth while pulling until it comes off.
Prior to data recording with the data logger, you have to replace the protective cap tightly again.
INSERTING/REPLACING THE BATTERY6.
Prior to working with the data logger, you rst have to insert the enclosed batteries.
With a pointed object (e.g. a small screwdriver or similar), open the casing. Lever the casing off in the direction 1.
of the arrow.
Pull the data logger from the casing.2.
Turn the data logger around and insert the battery into the battery compartment observing the right polarity. 3.
Observe of the polarity markings in the battery compartment. The two displays briey light up for control
purposes (alternating, green, yellow, green).
Slide the data logger back into the casing until it snaps into place. Now the data logger is ready for 4.
programming.
A battery change is required if the two displays do not light up when starting the measuring process or when the
red „ALM“ display (3) blinks in 60 second intervals.
The saved data is not lost in case of a battery change or a breakdown during recording.
DRIVER/SOFTWARE INSTALLATION7.
Insert the CD into the CD-ROM of your computer.1.
The installation will start automatically. If not, please go to your CD-ROM directory, and open the installation 2.
le “autorun.exe”.
Select your desired language from German, English and French.3.
Follow the instructions on the dialog box, select the destination for the installation and complete the 4.
installation.
For further information, please refer to the operating instructions on the CD provided.5.
The enclosed software is the Voltsoft standard edition. The professional version (Voltsoft Data Logger, No. 10 6.
13 33) is an optional item which you can purchase separately. If you purchase the professional version, you
will get the license key. Follow the steps in the Voltsoft user manual, to register and upgrade your software
to the professional version.
Summary of features:
Standard Professional
User Management
Email Management
General Settings
Language Preference
Email Template
Device Management (Add / Remove)
Custom Graph
Email Alert
Web Interface
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Voltcraft DL-101T bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Voltcraft DL-101T in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info