540738
5
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
5
Pro-500 and Total Nutrition Center 3 Models
3
5
6
1
2
1. On/O Switch (l)/(O): The On/O Switch controls the power to the machine base. The On/O Switch is located on the front of the
machine. After plugging in the unit, make sure the marker on the Variable Speed Dial is pointed at the Stop Symbol ( ) at the top of
the dial and move the On/O Switch to the On position.
Move the On/O Switch to the O position at night and whenever the machine will be left unattended.
If the On/O switch is moved to the O position to stop a program mid-cycle, wait 30 seconds for power to recycle and the timer to
reset before moving the On/O switch to the On position.
2. On/O Light: The On/O light is located on the front of the machine above the On/O switch. When lit, the machine is plugged in and
the On/O switch is in the On position. The light will flash when a program is near completion.
3. Start ( )/Stop ( ) Switch: After the marker on the Variable Speed Dial is rotated o of the Stop Symbol ( ) to either Variable Speed
1 or a Program setting, press the Start/Stop Switch to start the machine and initiate the blending process. Pressing the Start/Stop
Switch again will stop the blending process.
Programs can be interrupted by pushing down the Start/Stop switch at any time. If reactivated by pushing down the Start/Stop switch,
the program will start at the beginning.
4. Pulse Switch ( ): Variable Speed: Pressing down on the Pulse Switch will cause the machine to blend at the speed setting shown on
Variable Speed Dial for as long as the Pulse Switch is held down. The Pulse function can be used when a program is selected. Pushing
down the Pulse switch when a program is selected will cause the machine to run at 50% of high power for as long as the Pulse switch
is pushed down.
3
4
CONTROL PANEL (CONTINUED)
5. Variable Speed Dial: The Variable Speed Dial serves two functions; the use of three programs settings or ten variable speed settings.
• To use programs: rotate the Variable Speed Dial to the left to the desired program.
• To use Variable Speed:
a. Rotate the Variable Speed dial right to 1.
b. Press down on the Start/Stop switch.
c. Rotate the Variable Speed dial between 1 and High during the blending cycle to increase or decrease the speed of the blades.
d. At the end of the blending cycle, rotate the Variable Speed Dial back to the Stop Symbol ( ).
6. Programs: Your machine is equipped with three program settings for the most commonly used recipes. Rotating the Variable Speed
Dial left of center allows you to select a program for Smoothies, Frozen Desserts, and Hot Soups. These programs are optimized
for these recipe categories, but may also work well with other recipe choices. Programs vary in blending speed and duration and
will automatically stop at the end of the program. Programs can be interrupted by pushing down the Start/Stop switch at any time.
If reactivated by pushing down the Start/Stop switch, the program will start at the beginning.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vitamix TOTAL NUTRITION CENTER 3 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vitamix TOTAL NUTRITION CENTER 3 in de taal/talen: Nederlands, Engels, Frans, Italiaans, Spaans, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 3,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Vitamix TOTAL NUTRITION CENTER 3

Vitamix TOTAL NUTRITION CENTER 3 Gebruiksaanwijzing - Deutsch - 48 pagina's

Vitamix TOTAL NUTRITION CENTER 3 Gebruiksaanwijzing - English - 48 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info