594799
11
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
GB GB
Retro DAB+ Operation Guide
21
Retro DAB+ Operation Guide
20
7. To store the current station as a preset:
a. You can store up to 10 DAB/DAB+ presets.
b. Press and hold PRE (3) until a ashing ‘1’ is shown on the bottom right of the display and then
release the button. If you have no station stored as preset 1 “Preset Empty” will be displayed.
If you do have a station stored as preset 1, its name will be shown.
c. You can now cycle through your presets by pressing (4) or (6).
To store a station as a preset, either in an empty slot or replacing a previously stored station, press
(5). “Preset x Stored” will briey display on the lower line.
8. To select a preset station: press and release PRE (3). Press (4) or (6) to cycle through your
presets and press (5) to select the preset station currently displayed.
9. To display station information, repeatedly pressing INFO (8) will cycle through station information
that can include Dynamic Label Segment (DLS) or radiotext, station name, time and date, frequency,
stereo/mono, bit rate or signal quality. The information type you select will then be displayed for the
current DAB/DAB+ station.
10. To set the time: in DAB/DAB+ mode your Retro DAB+ will synchronize with the time and date of
the station.
FM
1. For best reception, make sure the aerial is fully extended vertically.
2. If the display shows the clock, press (1) to switch to working mode.
3. To switch to FM press MODE (7) repeatedly until the display briey shows ‘Switch to FM’.
a. First time use, or after Factory Reset: Your Retro DAB+ will tune to and display 87.70MHz, the lowest
point of the FM spectrum
b. Subsequent use: Your last selected station will be displayed, tuned and played if possible.
4. To autoscan stations, briey press (2) to search for stations up the FM spectrum. Your Retro DAB+
will stop the scan and play the rst station it nds. To search down the spectrum, long press (2).
Using your Retro DAB+
Go through positioning, preparing and switching on, above if required.
If the clock is displayed, your Retro DAB+ is in standby mode. If so, press (1) to leave standby mode and enter
working mode.
You can now use the “Mode” button (7) to select the mode you want. How to use each mode is described below.
DAB/DAB+
1. For best reception, make sure the aerial is fully extended vertically.
2. If the display shows the clock, press (1) to switch to working mode.
3. To switch to DAB/DAB+ press MODE (7) repeatedly until the display briey shows ‘Switch to DAB’.
a. First time use, or after Factory Reset: Your Retro DAB+ will automatically begin to quick scan for DAB/DAB+
stations. A progress bar will show the progress of the scan, and multiplex information is shown. Stations found
will be automatically stored. The number of stations found will also be displayed at the upper right corner of
the display. The rst station available will be shown on the display and played automatically. If no DAB/DAB+
signal is detected, “No Signal” will be displayed.
b. Subsequent use: Your last selected station will be displayed, tuned and played if possible.
The display will show the Station Name and ‘DAB’ on the top line, and the Programme Type, if available, on the
second line.
4. To switch between stored stations press (4) or (6).
5. To scan for stations:
a. Quick Scan: Press (2)
b. Full Scan: Press and hold (2)
A progress bar will show the progress of the scan with multiplex information below it. Stations found will be
automatically stored. The number of stations found will be displayed in the upper right corner of the display.
6. To manually tune to DAB/DAB+ stations, press and hold (5) until ‘Manual tune’ is displayed. Now press
(4) or (6) to scroll through channel 5A-13F. Press (5) button to conrm the channel, then press
(4) or (6) to scroll through stations in this channel, and press (5) to play the selected station.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw View Quest Retro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van View Quest Retro in de taal/talen: Engels als bijlage per email.

De handleiding is 5,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van View Quest Retro

View Quest Retro Gebruiksaanwijzing - Nederlands - 14 pagina's

View Quest Retro Gebruiksaanwijzing - Deutsch - 14 pagina's

View Quest Retro Gebruiksaanwijzing - Français - 14 pagina's

View Quest Retro Gebruiksaanwijzing - Espanõl - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info