574300

Vertex Standard VX-354 Handleiding

2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Code Set
Press the assigned Programmable key to change the encode digits for 5-tone
operation. To change a specific digit, select the desired digit using the
[
A
]
key, then
change the number using the
[
B
]
/
[
C
]
keys, and store the number using the
[
D
]
key.
Speed Dial
Your Dealer may have pre-programmed Auto-Dial telephone number memories (up
to five memories) into your radio.
To dial a number, press (or Press and hold) the assigned Programmable key to
toggle the pre-programmed Auto-Dial telephone number memory, then press the
PTT switch. The DTMF tones sent during the dialing sequence will be heard in the
speaker.
Emergency
The VX-350 series includes an “Emergency” feature, which may be useful, if you
have someone monitoring on the same frequency as your transceiver’s channel. For
further details contact your VERTEX STANDARD dealer.
Option Switch 1, Option Switch 2
When the optional unit is installed, these functions have various uses.
For further details, contact your VERTEX STANDARD dealer.
Lock
Press (or Press and hold) the assigned Programmable key to lock the VX-350’s
knob, Programmable keys, and PTT switch. The precise lockout configuration is
programmed by your VERTEX STANDARD dealer.
Follow-Me Scan
“Follow-Me” Scan feature checks a User-assigned Priority Channel regularly as
you scan the other channels. Thus, if only Channels 1, 3, and 5 (of the 8 available
channels) are designated for “Scanning,” the user may nonetheless any channel as
the “User-assigned” Priority Channel via the “Follow-Me” feature.
Press the assigned Programmable key to activate “Follow-Me” scanning, then
turn the CH selector knob to the channel which you want to designate as the “User-
Assigned Priority Channel”. When the scanner stops on an “active” channel, the
User-assigned Priority Channel will automatically be checked every few seconds.
SQL Set
You can manually adjust the squelch level using this function:
Press the assigned Programmable key. A tone will sound, and the current
squelch level will appear on the display.
Press the
[
Side 1
]
/
[
Side 2
]
key to select the desired squelch level.
Two seconds after releasing the
[
Side 1
]
/
[
Side 2
]
key, the display will revert
to the normal channel indication.
Lone Worker
Press and hold the assigned Programmable key to toggle the Lone Worker fea-
ture “ON” and “OFF.”
The Lone Worker feature will emit an audible alarm for 30 seconds at one second
intervals when the Lone Worker Timer has expired. If the user does not reset the
timer by pressing the PTT switch, the radio switches to the Emergency mode.
TA Scan
Press the assigned programmable key to toggle the TA (Talk Around) scan feature
“On” and “Off.”
While TA scan is proceeding, the VX-350 will search both the transmit and receive
frequencies (the “ ” icon will blink on the LCD versions). When a signal is en-
countered on the receive frequency, the VX-350 will pause until the signal disap-
pears (“ ” icon will appear but not blink). When a signal is encountered on the
transmit frequency, the VX-350 will check for activity on the receive frequency
every few seconds (interval programmed by your Dealer).
SQL Off
Press (or Press and hold) the assigned Programmable key to disable the Noise
and Tone squelch. Again press (or Press and hold) the assigned Programmable
key to resume normal (quiet) Noise and Tone squelch action.
Scan Set
Press (or press and hold) the assigned Programmable key to delete the Current
Memory Channel from the Scanning List. When you delete a channel from the
Scanning List, a ringing beeper will sound, and “ ” icon will disappear from the
LCD (LCD version). To restore a particular channel to your Scanning List, press (or
press and hold) the assigned Programmable key again; a ringing beeper will sound,
and “ ” icon will appear on the LCD (LCD version).
Whisper
Press (or Press and hold) the assigned Programmable key to increase the micro-
phone gain; thus you can speak in a low voice (whisper) temporarily. Again press
(or Press and hold) the assigned Programmable key to resume normal micro-
phone gain.
Beep Off
Press (or Press and hold) the assigned Programmable key to disable the radio
beeps temporarily. Again press (or Press and hold) the assigned Programmable
key to enable the radio beeps.
Mon
(
Monitor
)
Press (or Press and hold) the assigned Programmable key momentarily to disable
the Tone squelch.
Lamp
Press (or Press and hold) the assigned Programmable key to illuminate the LCD
for five seconds (LCD version).
Scan
The Scanning feature is used to monitor multiple channels programmed into the
transceiver. While scanning, the radio will check each channel for the presence of a
signal, and will stop on a channel if a signal is present.
To activate scanning:
Press (or Press and hold) the assigned Programmable key.
The scanner will search the channels, looking for active ones; it will pause each
time it finds a channel on which someone is speaking.
To stop scanning:
Press (or Press and hold) the assigned Programmable key.
Operation will revert to the channel to which the CH knob is set.
DW
(
Dual Watch
)
The Dual Watch feature is similar to the Scan feature, except that only two channels
are monitored: the current operating channel, and the “Priority” channel.
To activate Dual Watch:
Press (or Press and hold) the assigned Programmable key.
The scanner will search the two channels; it will pause each time it finds a
channel on which someone is speaking.
To stop Dual Watch:
Press (or Press and hold) the assigned Programmable key.
Operation will revert to the channel to which the CH knob is set.
Low Power
Press (or Press and hold) the assigned Programmable key to set the radio’s trans-
mitter to the “Low Power” mode, thus extending battery life. Press (or Press and
hold) the assigned Programmable key again to return to “High Power” operation
when in difficult terrain.
When the radio’s transmitter is set to “Low Power” mode, the “L” icon will be
indicated on the LCD (LCD version).
TA
(
Talk Around
)
Press (or Press and hold) the assigned Programmable key to activate the Talk
Around feature when you are operating on duplex channel systems (separate re-
ceive and transmit frequencies, utilizing a “repeater” station). The Talk Around fea-
ture allows you to bypass the repeater station and talk directly to a station that is
nearby. This feature has no effect when you are operating on “Simplex” channels,
where the receive and transmit frequencies are already the same.
When the “TA” function is activated, the “ ” icon will be indicated on the LCD
(LCD version).
TX Save Disable
Press (or Press and hold) the assigned Programmable key to disable the Transmit
Battery Saver, if you are operating in a location where high power is almost always
needed.
The Transmit Battery Saver helps extend battery life by reducing transmit power
when a very strong signal from an apparently nearby station is being received. Un-
der some circumstances, though, your hand-held radio may not be heard well at the
other end of the communication path, and high power may be necessary at all times.
Encryption
When the Voice Scrambler feature is enabled, pressing the assigned Program-
mable key of the “Encryption” toggles the Scrambler “on” and “off.”
Channel Up
Press (or Press and hold) the assigned Programmable key to switch to a higher
operating channel number.
Channel Down
Press (or Press and hold) the assigned Programmable key to switch to a lower
operating channel number.
Call, Reset
Press (or Press and hold) the assigned Programmable key to silence the receiver
and reset for another call, when a communication is finished.
Call 2, Call 3
Press (or Press and hold) the assigned Programmable key to send a 5-Tone se-
quential tone group which is pre-defined.
Code Up, Code Down
Press (or Press and hold) the assigned Programmable key to switch to a higher
(or lower) paging code number for the 5-Tone Paging System.
Description of Operating FunctionsKey Functions
All versions of the VX-350 provide
[
Side 1
]
and
[
Side 2
]
keys. The LCD version
of the VX-350 provide
[
A
]
,
[
B
]
,
[
C
]
, and
[
D
]
function keys. These Program-
mable keys functions can be customized (set to other functions), via program-
ming by your VERTEX STANDARD dealer, to meet your communications/net-
work requirements. Some features may require the purchase and installation of op-
tional internal accessories. The possible Programmable key features are illus-
trated below, and their functions are explained in the next chapter. For further de-
tails, contact your VERTEX STANDARD dealer.
For future reference, check the box next to each function that has been assigned to
the Programmable key on your particular radio, and keep it handy.
ARTS
(
Auto Range Transpond System
)
This system is designed to inform you when you and another ARTS-equipped sta-
tion are within communication range.
During ARTS operation, your radio automatically transmits for about 1 second
every 55 seconds (or 25 seconds: Dealer Programmed) in an attempt to shake hands
with the other station.
If you are out of range for more than two minutes, your radio senses that no signal
has been received, a ringing beeper will sound, and “OUT RANGE” will appear on
the LCD (on the LCD version). If you subsequently move back into range, as soon
as the other station transmits, your beeper will sound and “IN RANGE” will appear
on the LCD (on the LCD version).
DTMF Paging System
This system allows paging and selective calling, using DTMF tone sequences.
When your radio is paged by a station bearing a tone sequence which matches
yours, your radio’s squelch will open and the alert will sound. On the LCD version,
the three-digit code of the station which paged you will be displayed on your radio’s
LCD.
1: LCD Version only
2: Requires FVP-25, FVP-35, or FVP-36 Encryption Unit.
3: FVP-35 only
FUNCTION
None
Mon
(
Monitor
)
Lamp
1
Scan
DW
(
Dual Watch
)
Low Power
TA
(
Talk Around
)
TX Save Disable
Encryption
2
CH Up
1
CH Down
1
Call
Reset
Call 2
Call 3
Code Up
1
Code Down
1
Code Set
1
Speed Dial
1
Emergency
Option Switch 1
3
Option Switch 2
3
Lock
FM-Scan
SQL Set
1
Lone Worker
TA Scan
SQL Off
Scan Set
Whisper
Beep Off
[
D
]
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
--
/--
/
/
/
/
/
--
/--
/
/
/
/
/
[
Side 2
]
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
--
/--
/
/
/
/
/
--
/--
/
/
/
/
/
[
Side 1
]
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
--
/--
/
/
/
/
/
--
/--
/
/
/
/
/
[
C
]
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
--
/--
/
/
/
/
/
--
/--
/
/
/
/
/
[
B
]
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
--
/--
/
/
/
/
/
--
/--
/
/
/
/
/
[
A
]
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
--
/--
/
/
/
/
/
--
/--
/
/
/
/
/
PROGRAMMABLE KEY
(
PRESS / PRESS AND HOLD
)
ATTENTION IN CASE OF USE
This transceiver works on frequencies which are not generally permitted.
For frequency allocation, apply for
a licence at your local spectrum
management authority.
For actual usage contact your
dealer or sales shop in order to get
your transceiver adjusted to the al-
located frequency range.
AUT BEL BGR CYP CZE DEU
DNK ESP EST FIN FRA GBR
GRC HUN IRL ITA LTU LUX
LVA MLT NLD POL PRT ROU
SVK SVN SWE CHE ISL LIE
NOR
List of the practicable area
Vertex Standard LMR, Inc.
Copyright 2013
Vertex Standard LMR, Inc.
All rights reserved.
No portion of this manual
may be reproduced
without the permission of
Vertex Standard LMR, Inc.
Printed in China
Declaration of Conformity
We, YAESU UK Ltd. declare under our sole responsibility that the
following equipment complies with the essential requirements of the
Directive 1999/5/EC.
Type of Equipment: FM Transceiver
Brand Name: VERTEX STANDARD
Model Number: VX-351-D0-5, VX-354-D0-5,
VX-351-G6-5, VX-354-G6-5
Manufacturer: Vertex Standard Co., Ltd.
Address of Manufacturer: 4-8-8 Nakameguro Meguro-Ku, Tokyo
153-8644, Japan
Applicable Standards:
This equipment is tested and conforms to the essential requirements
of directive, as included in following standards.
EN 300 086-2 V1.3.1
Radio Standard: EN 300 113-2 V1.4.2
EN 301 489-01 V1.8.1
EMC Standard: EN 301 489-05 V1.3.1
EN 60065: 2002 +A1: 2006 +A11: 2008
Safety Standard:
The technical documentation as required by the Conformity Assess-
ment procedures is kept at the following address:
Company: YAESU UK Ltd.
Address: Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
MODEL
VX-351-D0-5
VX-354-D0-5
VX-351-G6-5
VX-354-G6-5
VX-351-G7-5
VX-354-G7-5
FREQUENCY
134-174 MHz
134-174 MHz
400-470 MHz
400-470 MHz
450-512
(
520
)
MHz
450-512
(
520
)
MHz
TX POWER
5 W
5 W
5 W
5 W
5 W
5 W
DISPLAY/KEYPAD
Non
LCD/4 Key
Non
LCD/4 Key
Non
LCD/4 Key
MODEL REFERENCE
WARRANTY POLICY
Vertex Standard warrants, to the original purchaser only, its Vertex Standard
manufactured communications products against defects in materials and
workmanship under normal use and service for a given period of time from
the date of purchase.
Limited Warranty Details:
North America customers (USA and Canada):
http://www.vertexstandard.com/lmr/warranty-terms.aspx
Customers outside of North America:
Contact the authorized dealer in your country.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vertex Standard VX-354 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vertex Standard VX-354 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info