622070
7
Verklein
Vergroot
Pagina terug
1/77
Pagina verder
WS1060
V. 02 26/04/2013 7 ©Velleman nv
Install the weather station as follows:
1. Make sure the outdoor unit is fully assembled and batteries are installed in outdoor unit and base station.
2. Place the outdoor unit and base station in the locations where you want them, and check if the
communication is working.
o If yes, continue with the next step.
o If no, change the location of the outdoor unit and/or base station until proper communication is
established.
3. Use the adjustable hoops (incl.) to attach the shaft of the outdoor unit to a mast [M]. Before you tighten
the screws, check if the weather station is positioned well, as described below.
4. On the edge of the wind direction sensor, there are markers [N] representing the north (N), east (E), south
(S), and west (W). Use a compass (not incl.) to position the device so that the markers correspond with
your real location: the N marker must be directed north, the E marker east… If you do not position the
sensor correctly, the wind direction measurement will be incorrect.
5. Use the bubble level [B] on the rain collector to position the device perfectly level.
6. Fix the device in its final position by tightening the screws on the adjustable hoops [M].
7. Configuring the base station
The base station has five keys for easy operation: SET, +, HISTORY, ALARM, and MIN/MAX.
Press SET to scroll through settings.
Press the + key to increase values, or the MIN/MAX key to decrease values.
Press and hold the + or MIN/MAX keys for 2 seconds to increase/decrease in larger steps.
The setting procedure will end automatically after 30 seconds if you press no keys; or you can exit the
setting procedure at any time by pressing HISTORY.
7.1 Quick display mode
You can quickly change the information that is displayed on the LCD screen of the base station. Indicators on
the display show which information is currently shown. Select the information to display as follows:
1. From normal mode, press SET.
The station is now in quick display mode.
2. Press SET to confirm the current setting and go to the next; use the + or MIN/MAX keys to change the
values.
Setting
Display
Description
Wind
(nothing)
Display the wind speed.
Gust
Display the gust speed.
Rainfall
1h
Display the rainfall in the last hour.
24h
Display the rainfall in the last 24 hours.
week
Display the rainfall in the last week.
month
Display the rainfall in the last month.
TOTAL
Display the total rainfall since the last reset.
Note: when the total rainfall quantity is displayed, you can reset it by
pressing and holding SET for 2 seconds.
Temperature
TEMP
Display the outdoor temperature.
WIND CHILL
Display the outdoor wind chill.
DEW POINT
Display the outdoor dew point.
3. To return to normal mode, press HISTORY.
7.2 Units, date and time
To specify units and date/time settings, proceed as follows:
1. From normal mode, press and hold SET for 2 seconds.
The station is now in settings mode.
2. Press SET to confirm the current setting and go to the next; use the + or MIN/MAX keys to change the
values.
Setting
Description
LCD brightness
Adjust the brightness of the LCD display from 0 to 8.
Time zone
Select your time zone, from -12 to +12.
In Europe, 0 = GMT+1; 1 = GMT+2; -1 = GMT.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Velleman WS1060 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Velleman WS1060 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans, Pools als bijlage per email.

De handleiding is 2,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info