POWX0562 EN
Copyright © 2019 VARO P a g e | 9 www.varo.com
▪ The markers on the dimension scale show marks for depth with (A) and without (B) the
guide rail.
9.4 Cutting angle adjustment (Fig. 8)
▪ The angle can be altered between 0° to 45°.
▪ Unfasten the angle adjustment knob (8) on both sides, set the desired angle on the scale
(9) and retighten the knob.
9.5 Cut indicators
▪ The cutting line should be aligned with the 0° marker arrow when performing a cut at 0°.
▪ The cutting line should be aligned with the 45° marker arrow when performing a cut at 45°.
9.6 Guide rail adjustment (Fig. 9)
▪ Tighten the adjusting knob (16) to minimize the clearance between the saw and the rail.
9.7 Saw operation
Always hold the plunge saw with both hands.
Always guide the plunge saw forward. Never draw the plunge saw back!
▪ Secure the work piece so that it cannot get displaced or moved while sawing.
▪ Only move the saw forwards.
▪ Grip the saw tightly with both hands ensuring that one hand is placed on the main handle
and the other on the front handle.
▪ When using a guide rail, it must be fastened with screw clamps.
▪ Make sure the power cable is not placed in the swing direction.
▪ Place the front part of the machine onto the work piece.
▪ Switch the machine on using the on/off switch.
▪ Push the saw downwards to reach the cut depth.
▪ Push the saw forward evenly.
▪ After finishing the sawing cut, switch the machine off and move the saw blade upwards.
9.8 Cutting with rails
▪ Place the machine in the guide rails. Turn the machine on by pressing the on/off switch.
Press the saw downwards to reach the sawing depth. During first use the rubber lip is sawn off
and thus splinter protection is guaranteed. The edge of the splinter guard now exactly matches
the cutting edge.
▪ Push the saw uniformly forwards.
▪ Turn off the machine and tilt the saw blade tot the top when the saw cutting is complete.
10 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
10.1 Cleaning
▪ We recommend that you clean the device immediately each time you have finished using
it.
▪ Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪ Regularly clean the machine housing with a soft cloth, preferably after each use.
▪ Keep the ventilation slots free from dust and dirt.
▪ If the dirt does not come off use a soft cloth moistened with soapy water.
