756780
5
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
POWX04950 EN
Copyright © 2021 VARO P a g e | 5 www.varo.com
Do not work on materials containing asbestos. Asbestos is considered carcinogenic.
Warning! Toxic dust! Dust from materials such as lead paint, some types of wood,
minerals and metal, can be noxious.
Touching or inhaling this type of dust can present a danger to the user or person nearby.
Wear safety glasses and a dust mask!
Secure the work piece. Use clamps or a vice to secure the work piece. This is much safer
than holding it in your hand.
Never place your hand next to or in front of the device and the surface you are working on,
as slipping poses a risk of injury.
In the event of danger, immediately pull the mains plug out of the socket
Always run the mains cable away from the appliance and toward the rear
Avoid contact with the sanding sleeve in motion.
Do not work on moistened materials or damp surfaces.
Always apply the device to the working surface when switched on. When the task is
complete, lift the appliance off the work pieces before switching it off.
Always firmly hold the device with both hands whilst working. Ensure you have a solid
stance.
Allow the device to come to a complete stop and switch off before putting it down.
Always unplug from the mains socket before taking breaks, especially working on the
device (e.g. replacing sandpaper) and during non-use.
7 ASSEMBLY
Warning! Risk of injury! Always unplug from the mains before working on
the sanding brush.
7.1 Fitting and removing accessories (Fig. 1-2)
Press the spindle lock button.
Remove the securing screw with the hex hey.
Push the sanding accessory onto the tool holder.
Secure by refitting the securing screw.
Sanding accessories can only be fitted one way. The sanding accessory
must slide on easily. Do not attempt to force it onto the tool holder. Check
the correct direction of the sanding accessory.
Fit the sanding roller as described above.
Press the spindle lock button and turn the sander by hand until the spindle lock engages.
Turn the sanding belt anti-clockwise along with the slots on the sanding roller.
7.2 Installing the dust extraction hood (Fig. 3)
Insert the dust extraction hood (2) into the two fastening grooves (11) on the tool arm (10)
against slight resistance.
Tighten the clamping screw (4). The dust extraction hood (2) is now firmly installed on the
tool arm (10).
7.3 Adjusting the dust extraction hood (Fig. 4)
Adjust the dust extraction hood (2) so dust or sparks are not directed at the user.
The dust extraction hood (2) can cover the grinding spindle from various angles. Use the
locking grooves (12) for this purpose.
Following installation, loosen clamping screw (4) rotate the dust extraction hood (2) toward
the handle (6) according to the application and the work piece and tighten the clamping
screw (4). The dust extraction hood (2) will lock into place in several positions.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Varo POWX04950 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Varo POWX04950 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Varo POWX04950

Varo POWX04950 Gebruiksaanwijzing - Nederlands - 10 pagina's

Varo POWX04950 Gebruiksaanwijzing - Deutsch - 12 pagina's

Varo POWX04950 Gebruiksaanwijzing - Français - 11 pagina's

Varo POWX04950 Aanvulling / aanpassing - Alle talen - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info