473862
3
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
3
Instructions for Utilization (Please refer to Diagrams 1 and 2)
1. Before attempting to install filter unit, make sure you set up the pool first according to the
pool’s instruction manual step by step, but do not fill it with any water.
2. Unpack the Filter and Motor (3).
3. Position the transformer (1) at least 2 meters from the pool. There are four mounting holes
(2) on the transformer use these to fix to a base if required.
4. Link one end of Outflow Hose (7) with the Motor Outlet (4) and fasten with Clamp (6); Link
the other end of Outflow Hose (7) with Pool Inlet and fasten with clamp(6) likewise.
5. Properly position the transformer and make sure that the Transformer (1) is fixed securely.
Attention: There are four Mounting Holes (2) on the bottom of Transformer (1). If trans
former needs to be mounted on the base, you can fasten the transformer with screws.
6. Fill the pool to a suitable water level after confirming that the Inflow Cover (11) is sealed.
Pool water level shall be at least 150mm above Filter Inlet (12).
7. When attempting to install the unit, open the Inflow Cover (11) of the filter, connect the
Motor (3) into the outlet on end of Transformer (1) and connect the power plug of
Transformer (1) to the electrical socket protected by a (RCD). The filter is now ready to use.
Attention (Please refer to Diagrams 1 & 2)
1. If the filter unit stops working when the power cord plug of Transformer (1) is disconnected,
immediately seal the Filter Inlet (12) with the Inflow Cover (11) connected to the end of filter
housing with fine rope, this way, any dirt can be prevented from returning to pool through the
Filter.
2. If the environment temperature exceeds the normal level and the filter unit stops running
suddenly, this indicates that the temperature safeguard device in the motor is activated. In this
case, disconnect the power plug of transformer from the electrical outlet and then reconnect
the power plug of transformer to restart the filter unit when the temperature of the motor is
back to normal.
3. Do not block the water inlet and outlet of the filter or squeeze the Outflow Hose (7) when the
filter unit is working. Otherwise, the motor may be damaged due to flow obstruction.
4. The transformer is supplied with a thermal fuse-element. The thermal fuse-element will be
blown to cut off the circuit when the temperature is up to 130
o
C and the transformer is
damaged permanently. Please replace the transformer before the filter unit is in use again.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vandermeulen AC-90578 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vandermeulen AC-90578 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info