698340
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
1
Set up Wi-Fi connection
Basic operation
2
Add camera
3
1
2
After connecting the parent unit to your Wi-Fi network, tap
to select the VM991 camera.
3
Follow the instructions shown on screen, then tap .
After tapping on the "Add Camera" screen number 3, the camera unit will
reset to default and performs auto calibration. Wait until the camera unit finishes
panning.
Create a security key for the camera. The security key must contain 8
to 12 alphanumeric characters with at least one uppercase character
and one number.
Tap Done to continue.
4
Take a snapshot
Tap in Single View to take a snapshot of
the camera and save it into the micro SD card
(purchased separately) inserted in the parent
unit.
Record a video
Tap in Single View to record a video and
save it into the micro SD card inserted in the
parent unit.
The icon changes to when recording. Tap
it to stop recording.
Write down or remember the security key. You will need to provide the same
security key if you want to access your camera remotely.
After the camera unit is successfully added to your parent unit, the
parent unit displays the camera image in Single View.
If you have two camera units, tap < to display the Split View. The
Split View displays two camera previews. If you have more than two
camera units, tap the left or right arrow
at the bottom shows
other camera units.
You can pair up to 4 camera units to your parent unit.
The camera preview will be refreshed every second.
Play or mute sound
Tap in Single View to toggle between
mute or play sound transmitted from the
camera when streaming.
Make sure the parent unit's speaker volume
is not muted.
View the live camera
If you have two or more camera units, tap the camera
preview on Split View to live-stream with the camera in
Single View.
Split View
micro SD card is inserted in the parent unit.
There are motion alerts.
Show the menu options of the camera.
Show previous two cameras.
Show next two cameras.
Single View
Motion detection setting is turned on.
Tap to select your preferred and secured 2.4GHz Wi-Fi network
with good signal strength.
- You must select a password-protected network.
Type in the password of the Wi-Fi network, and then tap Done.
After the parent unit is fully charged,
power on the parent unit.
4s
1
A welcoming tutorial is displayed. Tap to keep on
reading the tutorial. Tap Get started to begin using your HD
video monitor.
You can tap to tick the Never show again option to skip
the tutorial in future.
2
Go to www.vtechphones.com
to register your product for enhanced warranty support
and latest VTech product news.
Quick start guide
VM991
VTech Wi-Fi HD Video Monitor allows you to stay
close to your baby when you are on the move or
away.
This monitor is Wi-Fi enabled, which uses your home
wireless network to stream live video and audio
through the HD camera unit and 5-inch touch screen
parent unit. It allows you to maintain a constant
connection to your baby.
You can also monitor from your smartphone and
mobile tablet.
VTech Wi-Fi HD Video Monitor uses MyVTech
Baby app to let you instantly see and hear what’s
happening with your baby from anywhere in the
world. The app can be downloaded from the App
Store or the Google Play
TM
Store, directly from your
smartphone or mobile tablet.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw VTech VM991 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van VTech VM991 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van VTech VM991

VTech VM991 Installatiehandleiding - English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info