809830

VTech BM3300 Handleiding

2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Using the baby monitor
Power the baby unit on or off
Slide the ON/OFF switch up to turn the
baby unit on. The ON/OFF LED light turns
on.
Slide the ON/OFF switch down to turn
the baby unit off. The ON/OFF LED light
turns off.
Power the parent unit on or off
Press and hold to turn the parent unit on.
The screen turns on.
Press and hold again to turn the parent
unit off. The screen turns off.
Turn the parent unit screen on
or off
You can turn the parent unit screen on or off
without switching the parent unit off. You can
still hear sound from the baby unit.
Press LCD ON/OFF on the parent unit to
turn the screen off.
Press any key on the parent unit to turn the
screen on again.
Adjust speaker volume
For parent unit:
Press VOL+/VOL- on the parent unit to
adjust the speaker volume.
NOTE
When the parent unit speaker volume is set to
zero, appears on the screen and the light
turns on.
For baby unit:
The baby unit speaker volume determines the
talkback volume transmitted from your parent
unit.
Press +/VOLUME/- on the baby unit to
adjust the speaker volume.
•
•
•
•
•
•
•
•
•
Adjust LCD brightness
You can change the brightness of the parent
unit screen from Level 1 to Level 5. The LCD
brightness is preset to Level 3.
Press MENU when the parent unit is idle.
Press or to choose , then press .
Press or to choose the desired level of
brightness, then press SELECT to confirm
your selection.
Zoom
You can zoom in while viewing images from
the baby unit.
Press to zoom in.
Press or to move the zoomed image
up or down.
Press or to move the zoomed image
left or right.
Press again to zoom out.
Talk
You can use the TALK function on the parent
unit to comfort your baby.
Press and hold TALK on the parent unit.
The TALK light turns on.
Speak towards the microphone on the
parent unit. Your voice is broadcast to the
baby unit.
Release the TALK key to stop the
broadcast. The TALK light goes off.
1.
2.
3.
•
•
•
•
1.
2.
3.
Lullaby
You can play the lullabies on the baby unit
from the parent unit. On the baby unit, you can
control the volume level of the lullabies.
Playing lullabies
Press MENU when the parent unit is idle.
Press or to choose , then press .
Press or to choose a lullaby, or choose
to stop playing.
Press SELECT to confirm your selection.
Volume level control on baby unit
Press VOL+ to increase the volume level of
the lullaby on the baby unit.
Press VOL- to decrease the volume level of
the lullaby on the baby unit.
NOTE
The lullaby will stop when you start using the
TALK function on the parent unit to comfort your
baby.
1.
2.
3.
4.
•
•
•
Monitor the temperature
Your baby unit monitors the temperature of
your baby’s room with its built-in temperature
sensor. If the detected temperature is out of the
preset temperature range, the parent unit will
display an alert message.
Set temperature range
You can set the desired room temperature
alert range. The minimum temperature can be
set between 50 oF (10 oC) and 76 oF (24 oC).
The maximum temperature can be set
between 77 oF (25 oC) and 102 oF (39 oC).
Press MENU when the parent unit is idle.
Press or to choose , then press .
Press or to choose , then press
SELECT.
Press or to choose or , then
press SELECT.
Press or to choose the desired
minimum or maximum temperature, then
press SELECT to confirm your selection.
Temperature alert tone
You can turn the temperature alert tone on so
that the parent unit will emit an alert tone if the
detected temperature is out of range.
Press MENU when the parent unit is idle.
Press or to choose , then press .
Press or to choose , then press
SELECT.
Press or to choose or , then
press SELECT to confirm your selection.
Temperature format
You can choose to display the temperature in
Fahrenheit (oF) or Celsius (oC).
Press MENU when the parent unit is idle.
Press or to choose , then press .
Press or to choose , then press
SELECT.
Press or to choose or , then
press SELECT to confirm your selection.
1.
2.
3.
4.
5.
1.
2.
3.
4.
1.
2.
3.
4.
General product care
To keep this product working well and looking good,
follow these guidelines:
Avoid putting it near heating appliances and devices
that generate electrical noise (for example, motors or
fluorescent lamps).
DO NOT expose it to direct sunlight or moisture.
Avoid dropping the product or treating it roughly.
Clean with a soft cloth.
DO NOT immerse the parent unit and the baby
unit in water and do not clean them under the tap.
DO NOT use cleaning spray or liquid cleaners.
Make sure the baby unit and parent unit are dry
before you connect them to the mains again.
Storage
When you are not going to use the baby monitor for
some time, remove the rechargeable battery from
the parent unit. Store the parent unit, the baby unit
and the adaptors in a cool and dry place.
Frequently asked questions
Below are the questions most frequently asked about
the baby monitor. If you cannot find the answer to your
question, visit our website at www.vtech.co.uk, or
contact 01235 546810 for customer service.
Why does
the baby
monitor not
respond
normally?
Try the following (in the order
listed) for a common cure:
1. Disconnect the power to the
baby unit and the parent unit.
2. Remove the batteries in the
parent unit. Then install the
batteries again.
3. Wait a few seconds before
connecting power back to the
baby unit and the parent unit.
4. Turn the baby units and the
parent unit on.on..
5. Wait for the parent unit to
synchronise with the baby unit.
Allow up to one minute for this to
take place.
•
•
•
•
•
•
•
Why don’t
the power-on
lights on the
baby unit or
the parent
unit go on
when I switch
the units on?
Perhaps the parent unit is not
connected to the power. Insert
the appliance plug into the parent
unit and put the adaptor in a wall
socket. Then press and hold to
switch the parent unit on and to
establish connection with the baby
unit.
Perhaps the baby unit is not
connected to the power. Insert
the appliance plug into the baby
unit and put the adaptor in a wall
socket. Then slide the ON/OFF
switch to ON to switch the baby
unit on and to establish connection
with the parent unit.
Why doesn’t
my parent
unit charge
while
connected to
AC power?
Make sure the battery is installed.
You may have used the battery for
a long time. Replace with a new
battery.
Why is my
screen in
black and
white?
The screen is in black and white
during night-time or in a dark room
when the night vision feature is
activated. This is normal due to
external light sources.
Why do I get
glare or a
blurry display
on my screen
when viewing
my baby at
night?
During night-time or in a dark
room, the surroundings and other
interfering factors, like lights,
objects, colours and backgrounds
may affect the image quality on
your parent unit screen. Adjust the
baby unit’s angle or place the baby
unit at a higher level to prevent
glare and a blurry display.
Why does
the baby
monitor
produce a
high-pitched
noise?
The parent unit and baby unit may
be too close to each other.
Move the parent unit away from
the baby unit until the noise
stops; OR
Turn down the volume of your
parent unit.
•
•
Why does
the parent
unit beep?
The baby unit may be out of
range. Move the parent unit closer
to the baby unit (but not less than
3 feet).
If the parent unit is powered by the
provided battery, it may not have
enough charge for the parent unit to
perform normally. Charge the battery
in the parent unit for up to 11 hours.
The temperature of your baby’s
room may be too high or too low.
The ON/OFF
light on the
baby unit
flashes and
the parent
unit displays
.
Follow below steps to pair the
baby unit. Make sure both parent
unit and baby unit are on before
pairing.
Press MENU when the parent
unit is idle.
Press or to choose ,
then press to select.
Press or to choose an
empty baby unit slot, then
press SELECT. The parent unit
screen displays .
Use a narrow-pointed object,
such as a pen, to press PAIR
on the bottom of the baby unit.
The ON/OFF LED light at
the side of baby unit flashes
quickly when pairing.
When pairing is successful, the
parent unit screen displays and
the LINK light turns on. The view
of the newly paired baby unit will
be shown on the parent unit. The
ON/OFF LED light on the baby
unit remains on.
If pairing fails, the screen
displays . Try the pairing
process again.
1.
2.
3.
4.
•
•
I have
accidentally
unpaired my
baby unit.
Why don’t
I hear a
sound/Why
can’t I hear
my baby cry?
The parent unit speaker volume
may be too low or off. Press VOL+
to increase the volume.
Why can’t I
establish a
connection?
Why is the
connection
lost every
now and
then? Why
are there
sound
interruptions?
The baby unit may be out of
range. Move the parent unit closer
to the baby unit (but not less than
3 feet).
Other electronic products may
cause interference with your baby
monitor. Try installing your baby
monitor as far away from these
electronic devices as possible.
Important safety instructions
When using your equipment, basic safety
precautions should always be followed to
reduce the risk of fire, electric shock and
injury, including the following:
Follow all warnings and instructions marked on
the product.
Adult setup is required.
This product is intended as an aid. It is not
a substitute for responsible and proper adult
supervision and should not be used as such.
This product is not intended for use as a medical
monitor.
Do not use this product near water. For example,
do not use it next to a bath tub, wash bowl,
kitchen sink, laundry tub or swimming pool, or in
a wet basement or shower.
CAUTION: Use only the batteries indicated in
this manual. There may be a risk of explosion if a
wrong type of battery is used for the parent unit.
Use only the supplied rechargeable battery for
the parent unit. Do not dispose of batteries in a
fire. They may explode. Dispose of used battery
according to the information in The RBRC® seal.
Use only the adaptors included with this
product. Incorrect adaptor polarity or voltage can
seriously damage the product.
Baby unit power adaptor: Output: 6V DC 500mA
Parent unit power adaptor: Output: 6V DC 500mA.
The power adaptors are intended to be correctly
oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place
if it is plugged into a ceiling, under-the-table or
cabinet outlet.
Unplug this product from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
Unplug the power cords before replacing
batteries.
Do not cut off the power adaptors to replace
them with other plugs, as this causes a
hazardous situation.
Do not allow anything to rest on the power cords.
Do not install this product where the cords may
be walked on or crimped.
This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply in your home, consult your dealer or local
power company.
Do not overload wall outlets or use an extension
cord.
Do not place this product on an unstable table,
shelf, stand or other unstable surfaces.
This product should not be placed in any area
where proper ventilation is not provided. Slots
and openings in the back or bottom of this
product are provided for ventilation. To protect
them from overheating, these openings must
not be blocked by placing the product on a soft
surface such as a bed, sofa or rug. This product
should never be placed near or over a radiator or
heat register.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Never push objects of any kind into this product
through the slots because they may touch
dangerous voltage points or create a short
circuit. Never spill liquid of any kind on the
product.
To reduce the risk of electric shock, do not
disassemble this product, but take it to an
authorised service facility. Opening or removing
parts of the product other than specified
access doors may expose you to dangerous
voltages or other risks. Incorrect reassembling
can cause electric shock when the product is
subsequently used.
You should test the sound reception every
time you turn on the units or move one of the
components.
Periodically examine all components for
damage.
Be aware of possible loss of privacy while using
public airwaves. Conversations may be picked
up by other nursery monitors, cordless phones,
scanners, etc.
Children should be supervised to ensure that
they do not play with the product.
The product is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
SAVE THESE INSTRUCTIONS
17.
18.
19.
20.
21.
22.
23.
Cautions
Use and store the product at a temperature
between 0oC and 40oC.
Do not expose the product to extreme cold, heat
or direct sunlight. Do not put the product close to
a heating source.
Batteries should not be exposed to excessive
heat such as bright sunshine or fire.
Warning—Strangulation
Hazard— Keep this cord out
of the reach of children (more
than 3 ft (0.9 m) away). Do not
remove this tag.
Never place the baby unit
inside the baby’s cot or
playpen. Never cover the baby unit or parent unit
with anything such as a towel or a blanket.
6. Other electronic products may cause
interference with your baby monitor. Try
installing your baby monitor as far away
from these electronic devices as possible:
wireless routers, radios, mobile telephones,
intercoms, room monitors, televisions,
personal computers, kitchen appliances and
cordless telephones.
1.
2.
3.
4.
5.
Customer service and
product warranty
IMPORTANT
Please retain this booklet with your sales receipt as
proof of the date of purchase.
Customer Service
Please call our Consumer Services Department on
01235 546810 (from UK) or +44 1235 546810
(outside UK) and a service representative will be
happy to help you.
This warranty is valid for the UK and Eire only. For products purchased outside
the UK and Eire, please contact your local distributor or place of purchase.
PRODUCT WARRANTY
PRODUCT REGISTRATION
P
R
O
D
U
C
T
W
A
R
R
A
N
T
Y
ONE
YEAR Thank you for choosing this quality product from VTech.
We hope it will bring many hours of entertainment,
imaginative play and learning.
1. The product detailed above is covered by a one year warranty from the date of purchase,
against any defects in materials or workmanship.
2. The product may be returned to the place of purchase. Alternatively the product can be
returned to VTech Electronics Europe plc (see address below), with proof of purchase,
without proof of purchase no replacement will be provided.
3. VTech Electronics Europe plc will examine the product and if it is found to be defective
due to faulty materials or workmanship, will replace the product at their discretion.
4. If the product covered by this warranty is damaged due to misuse, modification or
unauthorised repair, or because of faulty batteries, battery discharge or incorrect
electrical connections, then this warranty becomes void.
5. This warranty is personal to the original purchaser and is not transferable.
6. Breakages to the LCD screen are not covered by the warranty.
7. Returns to VTech Electronics Europe plc should include a cheque or postal order for
£1.50 towards the cost of return postage and packaging.
8. Products returned to VTech Electronics Europe plc, should be addressed as follows and
packed carefully to avoid damage in transit (Please do not include batteries or adaptor).
Please include details of the fault together with your name and address.
9. To keep an online record of your warranty, please register your product online at www.
vtech.co.uk/warranty
Vtech Electronics EU PLC, c/o XPO Logistics, Warehouse 350, Cat & Fiddle Lane, West
Hallam, DE7 6HE
THIS WARRANTY IS OFFERED AS AN EXTRA BENEFIT AND DOES NOT AFFECT
CONSUMERS’ STATUTORY RIGHTS.
UK
Visit www.vtech.co.uk/clubvtech/login
to register your VTech product
By joining the VTech Club you can also enter competitions, find
out about news and events, seek expert advice for parents and
let your kids play fun learning games and activities.
Technical specifications
Frequency
control
Crystal controlled PLL synthesizer
Transmit
frequency
Baby unit: 2405 - 2475 MHz
Parent unit: 2405 - 2475 MHz
Channels 32
Maximum
RF power
20dBm
LCD 2.8” Colour LCD
(WQVGA 320x240 pixel)
Nominal
effective
range
Actual operating range may
vary according to environmental
conditions at the time of use.
Power
requirements
Parent unit: 3.6V Ni-MH battery
Baby unit power adaptor:
Output: 6V DC @ 500mA
Parent unit power adaptor:
Output: 6V DC @ 500mA
Disposal of batteries and
product
The crossed-out wheelie bin symbols
on products and batteries, or on their
respective packaging, indicates they
must not be disposed of in domestic
waste as they contain substances
that can be damaging to the
environment and human health.
The chemical symbols Hg, Cd or
Pb, where marked, indicate that
the battery contains more than the
specified value of mercury (Hg),
cadmium (Cd) or lead (Pn) set out in
Battery Directive (2006/66/EC).
The solid bar indicates that the
product was placed on the market
after 13th August, 2005.
Help protect the environment by
disposing of your product or batteries
responsibly.
Declaration of Conformity
This product is intended for use within Europe.
Vtech Telecommunications Ltd hereby declares that
this model Safe & Sound® 2.8” Colour Video Baby
Monitor BM3300 is in compliance with the essential
requirements and other relevant provisions of
Directives: 1999/5/EC or 2014/53/EU.
The declaration of conformity for the BM3300 is
available at website http://www.vtech.com/rtte-directive.
Specifications are subject to change without notice.
© 2017 VTech Communications, Inc.
All rights reserved. 05/17. BM3300_UK_CIB_V1
Manufactured by VTech Telecommunications Ltd.
VTech Electronics Europe Plc, Napier Court,
Abingdon Science Park, Abingdon, Oxon, OX14 3YT.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw VTech BM3300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van VTech BM3300 in de taal/talen: Engels als bijlage per email.

De handleiding is 4.86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info