474331
7
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
MAGNET, SENSOR AND BRACKET INSTALLATION
We recommend that you install your C-16 in the following manner, starting with
the sensor unit on the fork and working up to the mounting bracket on the handlebar.
STEP 1
Mount the new Vetta universal S-2 sensor (pat. pend.) loosely (so that you can
slide it around) to the fork blade using the zip-tie provided. The sensor can be
mounted at any point along the fork, however, we recommend a position on the
back side and near the top of the left fork blade. This will protect the sensor from
being hit by rocks, trees and other objects.
STEP 2
Again, loosely install the sensor magnet to one of the spokes on the left side of
the front wheel. Adjust the magnet and sensor position by sliding both pieces
around until you get the sensor as high on the fork blade as possible while still
maintaining the necessary magnet to sensor spacing (1-2mm).
NOTE: The magnet
should pass within 1-2mm of the sensor, and the top of the magnet should be no
higher than the top of the small arrow molded into the face of the sensor.
Sensor
Zip-Tie
Alignment
Arrow
Fork Leg
Wheel
Magnet
1-2mm
Wiring Diagram
!
!
STEP 3
Route the sensor wire up the back of the fork securing with electrical tape.
CAUTION Do not use zip-ties to secure the sensor wire to the bike as this
may result in cut or broken wires.
CAUTION Be sure to leave enough slack in the wire to allow for the steering
motion of the bike and the action of the suspension fork, if you have one.
STEP 4
Carefully wrap the excess sensor wire around the front brake cable housing,
securing with electrical tape when necessary. When you are finished, you
should have just enough slack for the computer mounting shoe to reach the
handlebar.
Check to make sure that all of the excess sensor wire is either taped down or
wrapped around the brake cable so that nothing can catch on it while you are riding.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw VETTA C16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van VETTA C16 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van VETTA C16

VETTA C16 Gebruiksaanwijzing - Deutsch - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info