165783
4
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
5
GB
* Depending on version
METAL SLEEVE
Insert metal sleeve into the opening (182 x 53 mm) in the car dashboard
or console (fig. 7). See separate installation card. For optimal performance
of the CD player*, the metal sleeve should be positioned within the limits
shown (between -10° and +30°).
Fix metal sleeve into place by pressing the metal tags outwards using a screwdriver (fig. 8).
CONNECTING RADIO (fig. 9)
In order to make full use of the ON/OFF logic function of this set, which limits operation to
1 hour after removal of the ignition key, use adapter EA6259 for most cars excluding most
German makes.
Ensure battery is disconnected.
Insert aerial connector E into aerial socket. Good reception is only possible with a good aerial.
Fix aerial adapter (EA6257/00) if needed. Use hook (J) on back of set to secure fixing.
Insert power supply connector A into socket A.
Insert loudspeaker connector B into socket B.
(optional) Remove the protective cover from socket C.
(optional) Insert the yellow line-out connector C1 into socket C1.
(optional) Insert the blue CD changer connector C3 into socket C3.
(optional) Insert the green connector C2 into socket C2.
The green connector slides between the yellow connector C1 and the blue connector C3.
You need at least one of these connections to keep C2 in place.
MOUNTING RADIO
Slide the radio into the metal sleeve until the springs at either side of the radio snap into
the openings of the sleeve (fig. 10). NOTE: This set can be mounted in a Japanese car, please
consult your dealer.
Reconnect the negative car battery terminal (fig. 11). Installation is now complete.
REMOVING RADIO (fig. 12)
You can unlock the radio using the two U-brackets supplied.
Remove the front, see SECURITY, DETACHABLE FRONT.
Insert both U-brackets into the holes on the front of the set until they lock.
Remove the radio from the metal sleeve.
REPLACING FUSE (fig. 9)
Pull fuse F out of connector block at rear of radio. Replace with a 10 A blade-type fuse.
The new fuse must be of exactly this value and type otherwise the set will not be adequately
protected. Ignoring this procedure may lead to damage to the set, which will invalidate the
guarantee.
INTERFERENCE SUPPRESSION
Most modern cars have sufficient interference suppression. If you experience interference generated
by the car, consult your garage.
3
2
1
2
1
4
3
2
1
2
1
MOUNTING
RC719/819 GB 24/02/00 15:06 Page 5
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw VDO Dayton cd 3100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van VDO Dayton cd 3100 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info