741490
5
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
DS1067-057B 5
ENGLISH
GENERAL DESCRIPTION
The 1067/022 indoor display keypad, used to control and program the 1067 system is equipped with :
LCD backlit display with 2x 16 characters with contrast and luminosity regulation;
9 LED to signal the system status ( Power supply, Failure, Maintenance, Timing programmer, Open
input, Excluded inputs, Alarm, Tamper, Zone status);
12 door-protected alphanumerical keys;
7 browser keys;
buzzer with adjustable volume;
1 programmable input;
environment listening microphone (by phone with PSTN or GSM interface)
The keypad is protected against opening and removal and is powered by the Bus that connects it to the control
panel.
WARNING! In this document there are only present some essential indications about product.
For further and more detailed information, refer to manuals concerning 1067 control panels.
POSITIONING
Keypad must be positioned:
in an environment that is sheltered and protected from water and humidity;
on a dry and level wall;
in the vicinity of the accesses to area to be protected;
in an inner location which is not subjected to excessive sudden
rises/falls in temperature, and is protected by anti-burglar system; at
160 cm height for normal installations, or at 120 cm height for
installations suitable to disabled users
KEYPAD OPENING
Use a slotted screwdriver to open the keypad by gently pressing the point indicated in the image in order to
disengage the closure spur (Fig. 1).
INSTALLATION
For running the cables, open the scored hole on the bottom of the keypad (D - Fig. 2). Otherwise, the
scored holes for the cable ducts can be used (E - Fig. 2).
Secure the keypad bottom to the wall by means of 6 mm plugs (A/B - Fig. 2 - not provided). During fixing
always use also the hole (C - Fig. 2) for the protection against removal.
If bottom is fastened over round or rectangular a 3-place built-in box (e.g. BTICINO 503), use holes (A or B)
and suitable screws.
Warning: before fixing, verify the bottom direction: cover closing hook shall be positioned at the bottom.
Warning: For EN50131 Degree 3 certification, always use the anchor bolt in position C, even if the
keypad is fixed to a flushmounting box. This requirement is not mandatory for Degree 2 or lower
installations. This requirement is not mandatory for Degree 2 or lower installations.
For easier wiring, it is advisable to strip the cable as far as the access hole.
G
Fig. 1
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Urmet 1067-022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Urmet 1067-022 in de taal/talen: Duits, Engels, Italiaans als bijlage per email.

De handleiding is 0,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info