778967
6
Verklein
Vergroot
Pagina terug
1/39
Pagina verder
Do not use in very humid environments or in the direct
vicinity of water tanks. Prevent the device from getting
wet. Risk of electric shock! Do not cover air inlets / outlets.
When in use, do not put your hands or other items inside
the device!
3.1 ELECTRICAL SAFETY
a) The plug has to t the socket. Do not modify the
plug in any way. Using original plugs and matching
sockets reduces the risk of electric shock.
b) Use the cable only in accordance with its designated
use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat
sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
c) If using the device in a humid environment cannot
be avoided, a residual current device (RCD) should
be applied. The use of an RCD reduces the risk of
electric shock.
d) This device must not be used in locations with high
humidity, such as close to pools, in bathrooms etc.
e) It is forbidden to set the device in the immediate
vicinity of the electrical socket.
3.2 SAFETY AT THE WORKPLACE
a) Do not use the device in an explosion hazard zone,
for example in the presence of ammable liquids,
gasses or dust. The device generates sparks which
may ignite dust or fumes.
b) Upon discovering damage or irregular operation,
immediately switch the device o and report it to
a supervisor without delay.
c) If there are any doubts as to the correct operation
of the device, contact the manufacturer‘s support
service.
d) Only the manufacturer‘s service point may repair the
device. Do not attempt any repairs independently!
e) If a re starts, use solely powder or carbon dioxide
(CO2) re extinguishers suitable for use on live
devices to put it out.
f) Leaving the device unattended with the heating
function enabled may cause excessive temperature
rise in the heated room.
3.3 PERSONAL SAFETY
a) Do not use the device when tired, ill or under the
inuence of alcohol, narcotics or medication which
can signicantly impair the ability to operate the
device.
b) When working with the device, use common sense
and stay alert. Temporary loss of concentration
whilst using the device may lead to serious injuries.
c) To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
d) Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
3.4 SAFE DEVICE USE
a) Do not overload the device. Use appropriate tools
for the given task. A correctly selected device will
perform the task for which it was designed better
and in a safer manner.
b) Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
o). Devices which cannot be switched on and o
using the ON/OFF switch are hazardous, should not
be operated and have to be repaired.
c) When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d) Maintain the device in a good technical state. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
e) Device repair or maintenance should be carried out
by qualied persons, only using original spare parts.
This will ensure safe use.
f) To ensure the operational integrity of the device, do
not remove factory tted guards and do not loosen
any screws.
g) Avoid situations where the device halts during
use due to excessive loading. This may result in
overheating of the drive elements and device
damage.
h) Do not touch articulated parts or accessories, unless
the device has been disconnected from a power
source.
i) Do not cover the air intake and outlet!
j) The work surface should be level, dry and heat
resistant.
k) Use the device at an ambient temperature of 5 – 40 °
C. Never use the device at temperatures below 0°C.
l) Overturning or horizontal positioning of the device
with a water-lled tank may lead to its damage.
m) It is forbidden to use the device with an empty water
tank or when its level is below the minimum.
4. USE GUIDELINES
The evaporative air cooler is a device designed to lower
indoor temperature. In addition, the cooled air is cleaned
and humidied. Some of the models have the function of
heating and air ionization.
The user is liable for any damage resulting from
nonintended use of the device.
4.1 GERÄTEBESCHREIBUNG
UNI_COOLER_01 / UNI_COOLER_02
REMEMBER! When using the device, protect children
and other bystanders.
1
6
5
4
28
9
12
11
10
3
Note: The model UNI_COOLER_02 does not have an the
heating On / O button (2).
EN 10
21.02.2022
UNI_COOLER_03
UNI_COOLER_04
1. Control panel
2. On / O button of the heating function
3. Wheels
4. Water level indicator
5. Horizontal jalousies
6. Vertical jalousies
7. Inlet of water and ice
8. Power cord
9. Internal lter with Honey comb structure
10. Water tank
11. External lter
12. Handle
13. Water outlet
14. Ice tank
15. Top cover
4.2 PREPARING FOR USE
It is necessary to install the attached wheels in the device.
Place the device in a vertical position on a at and stable
surface. The device is equipped with lters. Before using the
device it is necessary to always make sure whether the lters
are installed in the device. The lack of the external lter
may cause damage to the device by getting contaminants
into its inside. The internal lter enables functioning of the
cooling process and additionally it also lters the air and
moisturizes it (during the cooling process).
4.3 DEVICE USE
Description of control panels and wireless remote controls
6
5
1
3
11
8
9
10
6
5
1
7
3
4
14
8
13
10
11
9
12
15
UNI_COOLER_01
11 EN
A. On / o switch
A1. – information on switching the device on / o
B. Ventilation speed adjustment button
B1. – low ventilation force
B2. – average ventilation force
B3. – strong ventilation force
C. Button for switching on the automatic movement of
the jalousie
C1. –information on activation of the jalousie
movement function
D. Ventilation mode selection button
D1. – normal mode
D2. – natural mode
D3. – night mode
E. Timer
E1. – time of automatic device shutdown
F. Button for switching on the cooling function
F1. information on activation of the cooling
function
G. Button for switching on the air ionization function
G1. information on activation of the ionization
function
UNI_COOLER_04
UNI_COOLER_03
G1
G
E
F
H
C
BA1
A
E1
C1
F1 H1 H2 D1 D3
B3
B2
B1
E1 C1 B2
E C B/D F A
D2
D3B3 F1B1 A1
E1
D1
D2 D3 C1 F1 B1 B2
B3
F
EDC
B
A
A1
A
F
C
E
B
D
UNI_
COOLER_04
A
F B/D
E C
F
E D
G
H
UNI_
COOLER_03
B/D
H
B/D
E
C
F
A
UNI_
COOLER_01
UNI_
COOLER_02
F
E
HCB/D
A
H3
D2 D3 C1 F1 B1 B2
B3
A1
E1
UNI_COOLER_02
6

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Uniprodo-Uni-Cooler-03

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Uniprodo Uni Cooler 03 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Uniprodo Uni Cooler 03 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 5.54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info