694450
3
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
3
Information
Keep this manual so that it is accessible to professionals and future needs.
Read this manual carefully before putting the pellet burner into service.
• Follow the manual and its instructions carefully and do recommended management and maintenance.
Registration to the local building authority in your municipality
N.B.: At every change of heating system, the local building authority of the municipality has to be contacted
and a so called “Construction Registration” is made.
Inspection
Heating plants installed today shall be inspected and approved by authorized inspector like the local certified
chimney-sweeper. The local building authority in the municipality can inform you how this could work.
Important at installation
Run the feed auger of the burner by itself until the pellets start to come in constant flow. This can be made
by connecting the feed cable of the burner directly to the cable of the auger. Run the auger approx. 15min
after the first pellets have reached the outlet on the auger.
The auger shall have a max angle 45 degrees and not be below 43 degrees.
We recommend that the length of the hose, between the burner and the auger, should not be below
500mm. The auger shall also be placed so that it sits a little to the side of the tipping chute of the burner,
this to avoid that pellets can fall down into the burner if back burning would occur when the hose burns off
as a part of the safety.
• Hose inclination must be more than 45 degrees, otherwise the pellets are stuck in the hose.
At adjustment of the burner, the draft limiter should be adjusted after the draft conditions of the chimney.
The feed cable of the burner shall be connected above the overheating protection of the boiler.
Sweeping
Chimney sweeping shall in accordance with the fire-protection law shall be made frequently during the year.
This is made by your local chimney sweeper. Regular cleaning of heating surface of the boiler shall be made
in a way so that good operating economy is obtained. Prepare sweeping by turning off the boiler at least a
couple of hours before cleaning to minimize the amount of glowing ash.
Warning!
See to that the power to the boiler is turned off before the cover over the burner is removed and dismount
cabling to the burner when the burner is removed from the boiler.
Maintenance agreement increases operation length and life of the burner
ULMA AB recommends subscription of annual maintenance agreement.
For more information contact your local ULMA retailer.
Change of wear parts
ULMA AB always recommends that wear parts, when needed, are being changed by an authorized service
technician at your ULMA retailer. Ulma’s retailers can provide necessary spare parts and at change make
sure that the parts being changed on the unit go through alignment and that a flue-gas analysis of the unit is
made.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ulma 40 Kw bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ulma 40 Kw in de taal/talen: Engels als bijlage per email.

De handleiding is 1,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Ulma 40 Kw

Ulma 40 Kw Gebruiksaanwijzing - Nederlands - 10 pagina's

Ulma 40 Kw Gebruiksaanwijzing - Français - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info