484752
3
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
3
4
1 . STEREO MAIN OUTPUT
Unbalanced RCA connectors controlled by the master fader.
2 . POWER SWITCH
Press the power switch to turn the unit on. To switch the POWER off press the POWER switch
again.
3 .
FUSES
Under normal operation the fuses should not blow. A blown fuse usually indicates
an overload or fault condition. To change the fuse, remove the power cord, pry off
the fuse block with a small flathead screwdriver and change the blown fuses.
Refer to the specification for fuse current ratings.
4 . AC CORD
Used this cable to connect the AC mains power to the unit
5 . SD PORT
Insert the SD card.
6 . USB PORT
Insert the USB.
7 . DISPLAY
TRACK
CUE
MIN .
SEC.
SIN GLE
CONTIN UE ROBO LOOP
ELAPSED TOT AL REMAIN PROGRAM REPEAT 1 ALL PITCH
,
A B
C
DEF
G
HI
J
KLNM
A. OPERATING MODE
These indicate the operating mode of the SD CARD or USB player
: The SD CARD or USB player is playing the SD CARD or USB.
: The playback is paused.
B. TIME MODE INDICATORS
ELAPSED:
TOTAL REMAINING:
REMAINING:
C. “PROGRAM” INDICATOR
This indicates the player is in programme mode.
D . REPEAT INDICATOR
REPEAT 1:
REPEAT ALL:
E. TIME BAR
INDICATOR
This is a graphical representation of the “Minute, second and frame displays” (C).
F. “PITCH” INDICATOR
This indicates the pitch slider (12) is activated.
G. “LOOP” INDICATOR
This indicates the SD CARD or USB player is currently playing
in a preset loop.
H. PITCH DISPLAY
This indicates the playback speed (pitch), from 16% to +16%.
I. PLAY MODE INDICATORS
SINGLE:
CONTINUE:
ROBO:
J. MINUTE, SECOND AND FRAME DISPLAYS
These
displays shows the current time, the value changes depends on the time mode selected.
K. “CUE” INDICATOR
This indicates a new cue is set.
L. TRACK NUMBER
This displays the position, number of track of the SD CARD or USB, which is playing.
M. FOLDER DISPLAY
N. ID3 COMMUNICATION DISPLAY
The SD CARD or USB player is in single mode.
The SD CARD or USB player is in continue mode.
The SD CARD or USB player is in relay mode.
The SD CARD or USB player is playing the selected track repeatedly.
The SD CARD or USB player is playing the entire SD CARD or USB repeatedly.
Played time of the selected track.
Tot a l remaining play time of the SD CARD or USB.
Remaining play time of the selected track.
8 . BPM EFX
9 .
FX TAP BUTTON
10. CUE TAP BUTTON
11.
first : control the SD card function.
- Press the second: control the USB function.
- Press along time ,after display “P-OFF” and will shut off the power for SD card/USB.
- If you take away the SD card/USB, then pressing the botton, will start up the SD/USB.
15. SKIP>>I BUTTON
In the “TRACK”mode,is next track.
IN BUTTON ( LOOP SYSTEM )
This button sets the beginning of the loop. The Loop indicator on the display flashes.
12. OUT
BUTTON ( LOOP BUTTON )
When you press this button, you set the end point of the seamless loop and you start the loop.
To finish the loop, press again this button.
13. RELOOP BUTTON ( LOOP SYSTEM )
This button is used to
start the last saved loop.
14. SD/USB BUTTON
- Press the
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw US Blaster MAX 7143 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van US Blaster MAX 7143 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info