4. Use the standard coffee spoon to add the right amount of coffee powder (as shown in Figure 4); Use the
end of the coffee spoon handle to even the coffee power out and compress it tightly (as shown in Figure 5)
5. Please make the coffee funnel upward aligning with the “Inserting” position of the coffee machine, and
switching it to the “Locking” position according to "→" (as shown in Figure 6)
6. Put the standard coffee pot on the water pan.
7. Switching on the power: switch the control knob to the position of “ ” and the indicator light is on. After
about 3 minutes, the coffee is flowing out from the funnel.
8. When the coffee reaches the required amount, please switch the control knob to the “PAUSE” position and
the indicator light is off. The machine stops working and the Italian Espresso Coffee making is completed.
9. Switch the control knob to the position of “RELEASE OFF” and discharge the remained pressure.
10. Machine with automatic power off, In case the user forgets to pull out the power plug after coffee making
or milk frothing, the coffee machine will automatically power off five minutes later. If you want to make coffee
or froth steam again after automatic power off, you must turn the function knob to "PAUSE" or "RELEASE"
position ,or off/on the power switch to reset and restart using the machine.
WARNING: The coffee machine can not be kept working continuously. If you need to use
it again, please wait for 3 minutes after releasing the steam.
Making cappuccino or other fancy coffee
1. Cappuccino is made of espresso + foamed milk So you need to make espresso at first, and the following
content mainly describes the process of milk foaming.
2. Switch the control knob to "RELEASE OFF" position, unscrew the top cover to add the right amount of
water, and screw the top cover of the coffee machine.
3. Pour the ice milk into the latte cup. Please use the whole pure milk: cold is better. Because the milk volume
will expand 2-3 times after foaming, so please select the appropriate container.
4. Switch the control knob to the position of " " and the indicator light is on. After 1 minute, the steam tube
