736468
18
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
18
English
Selected 20/ 10.
- The console will show a 3 second countdown to
start program.
1. Workout time of 20 seconds will count down to 0.
2. Rest time of 10 seconds will count down to 0.
3. Step 1 & 2 will cycle for 8 times.
Selected Custum.
- SET ROUND will blink, press “Set” button to select
the number of program cycles and confirm by
pressing “Enter”.
( Range 1 ~ 99 ± 1 )
- SET WORK will blink, press “Set” button to set
workout time and confirm by pressing “Enter”
( Range: 0:05~10:00 min. ± 0:01 sec.)
- SET REST will blink, press “Set” button to set rest
time and confirm by pressing “Enter”
( Range: 0:05~10:00 min. ± 0:01 sec.)
- The console will show a 3 second countdown to
start program.
1. Pre set workout time will count down to 0.
2. Preset rest time will count down to 0.
3. Step 1 & 2 will cycle for the number of preset
cycles.
Target mode
- Press “Mode” button to open program selection
mode, select “TARGET” by using “Set” button and
confirm by pressing “Mode”.
Time Target.
To set Time target press “Mode” button.
Set target time by pressing “Set” button.
(Target : 0:00~99:00 min. ± 1:00 min.)
Strokes Target.
To set Strokes target press “Mode” button.
Set target strokes by pressing “Set” button.
(Target : 10~9990 min. ± 10.)
Pulse Target.
To set Pulse target press “Mode” button.
Set target Pulse by pressing “Set” button.
(Target : 30~230 min. ± 1.)
Calorie Target.
To set Calories target press “Mode” button.
Set target Calories by pressing “Set” button.
(Target : 10~9990 min. ± 10.)
Distance Target.
To set Distance target press “Mode” button.
Set target Distance by pressing “Set” button.
(Target : 10~9990 min. ± 10.)
When set the desired target the console will start
workout. Target value will count down, all other
parameters will count up.
NOTE
It is not possible to set more than one target.
Cleaning and maintenance
The equipment does not require special maintenance.
The equipment does not require recalibration when
it is assembled, used and serviced according to the
instructions.
WARNING
Do not use solvents to clean the equipment.
Clean the equipment with a soft, absorbent cloth
after each use.
Regularly check that all screws and nuts
are tight.
If necessary, lubricate the joints.
Water changes color or becomes
cloudy
Possible cause:
Rower is in direct sunlight or has not had water
treatment.
Solution:
- Change rower location to reduce direct exposure to
sunlight.
- Add water treatment or change tank water as
directed in the water treatment section of this
manual.
Replacing the batteries
The console is equipped with 2 AA batteries at the rear
of the console.
- Remove the cover.
- Remove the old batteries.
- Insert the new batteries. Make sure that batteries
match the (+) and (-) polarity markings.
- Mount the cover.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tunturi R-80 W Rower Single rail bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tunturi R-80 W Rower Single rail in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Zweeds, Fins als bijlage per email.

De handleiding is 10,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info