484621
5
Verklein
Vergroot
Pagina terug
1/24
Pagina verder
Intended use
The altitude kit is required if the heating mode of the Combi D
is run for longer periods at heights of 1500 m to 2750 m.
Operating instructions
Working the changeover switch
Select the required switch setting before switching the heater on.
Setting 1 = Normal mode up to 1500 m
Setting 2 = Altitudes from 1500 m to 2750 m
The right to effect technical modifications is reserved!
Installation instructions
We recommend having the installation performed by a
qualified mechanic.
Observe applicable national regulations concerning the
handling of diesel fuel. Wear appropriate personal pro-
tection (e.g. suitable protective gloves). Avoid the build-up of
static charges, remove any ignition sources from the vicinity
and do not smoke. Ensure a good level of ventilation. Discon-
nect the battery before commencing work. Collect any escap-
ing diesel fuel in an appropriate vessel.
Scope of supply kit
1 Cable harness
1 Dosing pump (adjusted to high altitude)
1 Support
1 Angle
1 Set of connection parts
– 1 Y-piece Ø 4 mm
– 1 Y-piece Ø 5 mm
4 Reducer part 5 x 3.5 mm
– Clamps Ø 10 mm
1 Fuel line 2 m, 4 x 1 mm
1 Fuel hose 0.5 m, 3.5 x 3 mm
1 Changeover switch with cover
– 1 Shrink hose
– 3 Tab receptacles
1 Plug connector housing
1 Operating instructions / Installation instructions
Altitude kit
Fuel connection
Safety instructions for routing fuel lines
Always cut fuel hoses and lines to length using a hose cutter
(part no. 34020-45100) or other sharp knife. The areas that
have been cut must not be compressed and must be free of
burrs.
Fuel lines must always slope upwards when they are routed
from the metering pump to the heater (as uniformly as possible).
Fuel lines must be securely attached in order to prevent
damage and / or noise generation caused by vibration (recom-
mended spacing between attachment points approx. 50 cm).
Fuel lines must be protected from mechanical damage.
Route fuel lines so that vehicle twisting, engine movements
and the like do not adversely affect the stability thereof.
Protect fuel-carrying parts from heat that may affect operation
(use suitable thermal protection hose made from fibre glass
fabric with aluminium lining).
Never route or secure fuel lines immediately adjacent to the
exhaust ducts of the heater unit or the vehicle engine. If the
lines cross, maintain an adequate distance away from hot
components at all times – provide heat radiation protection
plates if necessary.
Do not leave gaps between fuel lines that are being connected
using a fuel hose. This prevents problematic bubble formation.
Correct line routing
Erroneous line routing
(bubble formation)
Installing the metering pump
Install the dosing pump (adjusted to high altitudes) in the fuel
system parallel to the standard dosing pump.
Always install metering pump with the pressure side (delivery
direction) sloping upwards.
Protect metering pump from heat (max. operating tempera-
ture 40 °C), therefore do not install in the vicinity of sound
mufflers and exhaust pipes.
Metering pump installation position
15˚
35˚
90˚
5
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trumatic Hoogteset Combi D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trumatic Hoogteset Combi D in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Deens als bijlage per email.

De handleiding is 2,53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info