689446
12
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
11 EN
cordless baton screwdriver PSCS 10-3,6V
Operation
Tips and notes on handling the cordless screwdriver
General information:
Check the tool in the bit holder for correct fit before every
application.
The centre position of the clockwise / counter-clockwise
rotationswitch (lock) is suited for work breaks or (drill) bit
exchange.
Screws:
In case of soft wood, screws can be screwed in without
pre-drilling.
In case of hard wood or large screws, it is recommended
to use a drill for pre-drilling.
When using countersunk screws, the drill hole should be
countersunk beforehand.
Especially smaller screws and bits may be damaged when
selecting an excessive torque and / or speed at the tool.
Drilling in general:
Take short breaks regularly during drilling. When doing so,
take the drill bit out of the drill hole so that the drill bit can
cool down.
Secure the workpiece in a tensioning device or vice.
Use a suitable aid to mark the intended location of the drill
hole.
Drilling in metal:
Use suitable metal drill bits (e.g. drill bits made of high-
speed steel (HSS)).
For larger drilling diameters, use a smaller drill bit for pre-
drilling.
Metal drill bits may also be used for drilling in plastic.
Drilling in wood:
Use drill bits suitable for wood.
Place a block of wood under the workpiece or drill in from
both sides so that the wood cannot break off when it is
being drilled through.
Use a wood drill bit with centring tip. For deep drill holes,
use an auger bit; for large drilling diameters, use a
Forstner bit.
Selecting the rotational direction
Note
To avoid damaging the gear, only change the rotational
direction when the device is at a standstill.
The motor's rotational direction can be changed by means of
the switch for clockwise / counter-clockwise rotation(5).
1. Press in the switch for clockwise / counter-clockwise
rotation(5) on the side to which the motor shall rotate.
I. II.
5
I. Screwing in II. Unscrewing
2. Carry out a short test run to see whether the rotational
direction matches the intended application. A wrong
rotational direction may damage the tool and / or
workpiece.
3. If required, set the switch for clockwise / counter-
clockwise rotation(5) to centre position (lock) to block the
on / off switch(12).
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec PSCS10 - 3.6V bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec PSCS10 - 3.6V in de taal/talen: Engels als bijlage per email.

De handleiding is 0,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Trotec PSCS10 - 3.6V

Trotec PSCS10 - 3.6V Gebruiksaanwijzing - Nederlands - 18 pagina's

Trotec PSCS10 - 3.6V Gebruiksaanwijzing - Deutsch - 18 pagina's

Trotec PSCS10 - 3.6V Gebruiksaanwijzing - Français - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info