753308
4
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
4 EN
heat gun HyStream 200
General Power Tool Safety Warnings– Power tool
use and care
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the power
tool before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
General Power Tool Safety Warnings– Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Device-specific safety warnings for heat guns
Negligent handling of the device may result in a fire.
Proceed with caution when using the power tool near
combustible materials.
Do not point the device at the same spot over a longer
period of time.
Do not use the device in a potentially explosive
atmosphere.
The heat can reach combustible materials which are
covered.
After use put down the power tool in an upright position
on the provided stand with the air outlet pointing
upward.
Do not leave the power tool unattended while in
operation.
Do not look directly into the nozzle opening at the air
outlet.
Never direct the hot air current at people or animals.
Never direct the hot air directly at a window or other glass
surfaces.
Never obstruct the hot air current by blocking or covering
the air outlet.
Do not use the power tool in wet surroundings or in areas
with an increased humidity level.
Do not use the suspension eye on the power cable as
transport aid.
Keep a sufficient distance between the air outlet and the
workpiece or the surface to be processed. An
accumulation of air can lead to overheating of the power
tool.
Allow the power tool to cool down sufficiently before
storing it away. The power tool, especially the air outlet, is
still very hot and can thus cause damage.
Intended use
The device was developed for the purpose of generating hot air
and may only be used whilst adhering to the technical data.
Only use the device
to remove flooring
to shrink foils and shrinking hoses
to dry incombustible paints and varnishes, damp objects or
grounds
to remove incombustible paints and varnishes
to bend and heat-seal plastics
to melt and thaw incombustible parts
for soldering and tin-coating
for dissolving adhesive bonds
ONLY with barbecue lighter nozzle: to light a barbecue
We recommend using the power tool with original Trotec
accessories.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec HyStream 200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec HyStream 200 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Trotec HyStream 200

Trotec HyStream 200 Gebruiksaanwijzing - Nederlands - 13 pagina's

Trotec HyStream 200 Gebruiksaanwijzing - Deutsch - 14 pagina's

Trotec HyStream 200 Gebruiksaanwijzing - Français - 14 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info