756399
8
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
7 EN
Operating manual – Barbeque thermometer BT40
Types of food with preselected target temperatures
Food Display
indication
Well
done
WELL
Medium
well
M WELL
Medium
MEDIUM
Medium
rare
M RARE
Rare
RARE
BEEF 77°C 74°C 71°C 66°C 63°C
LAMB 77°C 74°C 71°C 63°C -
VEAL 77°C 71°C 66°C 63°C -
HAM-
BURGER
77°C - - - -
PORK 77°C 74°C 71°C - -
FISH 63°C - - - -
TURKEY 74°C - - - -
CHICKEN 74°C - - - -
Setting the target temperature manually
1. Select the food and the cooking level for which you want to
change the target temperature.
2. Press and hold the MODE button (26) until the target
temperature indication TARGET TEMP(15) flashes.
3. Press the MIN button (25) or the SEC button (22) until the
desired target temperature is set. By holding these buttons,
the target temperature can be increased or decreased more
quickly.
4. Press the MODE button (26) again to confirm the set target
temperature.
Setting the timer
The device is equipped with a timer which can be used
independently of the temperature measuring probe. The
maximum selectable time is 99:59 (MIN:SEC).
1. To set a countdown, press the MIN (25) or SEC button (22)
until the desired time is displayed. By holding these buttons,
the time can be increased or decreased more quickly.
2. Press the GO/STOP/RST button (20) to activate the timer.
ðWhen the timer has expired, a continuous acoustic
signal is emitted and the indication for minutes/seconds
flashes.
3. Press the GO/STOP/RST button (20) to confirm.
ðThe acoustic signal is muted and the display stops
flashing.
Setting the stopwatch
The device is equipped with a stopwatch which can be used
independently of the temperature measuring probe.
1. Press the GO/STOP/RST button(20).
ðThe stopwatch starts running.
2. Press the GO/STOP/RST button (20) again to pause the
stopwatch.
3. Hold the GO/STOP/RST button (20) until the time is reset to
0M:00S.
Switching between °C and °F indication
1. Press the MODE button (26) to switch between °C and °F
for temperature indication.
Attaching the device with the magnetic holder or Velcro
strap
Caution!
Keep the base station and the hand-held receiver away
from hot surfaces. The devices can be damaged by
heat.
You can attach the hand-held receiver and/or the base
station to magnetic surfaces (e.g. refrigerator door) using
the magnetic holder.
You can attach the base station e.g. to the oven handle or
barbecue leg using the Velcro strap contained in the scope
of delivery.
To do so, pull the Velcro strap through the two
eyelets (13) at the bottom of the base station.
Fasten the Velcro strap in a way that the base station
cannot shift.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec BT40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec BT40 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Trotec BT40

Trotec BT40 Gebruiksaanwijzing - Nederlands - 10 pagina's

Trotec BT40 Gebruiksaanwijzing - Deutsch - 10 pagina's

Trotec BT40 Gebruiksaanwijzing - Français - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info