756401
6
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
6 EN
food thermometer BP5F
Switching on and selecting the measuring mode
Note:
Note that moving from a cold area to a warm area can lead to
condensation forming on the device's circuit board. This
physical and unavoidable effect can falsify the measurement. In
this case, the display shows either no measured values or they
are incorrect. Wait a few minutes until the device has become
adjusted to the changed conditions before carrying out a
measurement.
Proceed as follows to switch between measurement with
infrared and measurement with temperature probe:
1. Press any button to switch on the device.
2. Press the MEAS button(6) to switch between
measurement with infrared and measurement with
temperature probe.
ðIf the symbol for measurement with temperature probe
is displayed on the indication(13), the corresponding
measuring mode is selected.
ðIf the symbol is not displayed, the infrared measuring
mode is selected.
Measuring with infrared
Info
Vapours and smoke can influence the measurement.
Info
Ensure that the surface to be measured is free of dust,
dirt, ice or similar substances.
Info
To be able to gain exact measurement results on
surfaces which reflect heavily, stick matt masking tape
to the surface or apply matt black paint with a very
high and known degree of emission.
Info
Note the 20:1 ratio of the distance to the measuring
spot diameter. The larger the distance to the object,
the larger the measuring spot diameter and hence, the
less precise the measured result.
1. Switch the device on and select the infrared measuring
mode.
2. Point the device at the object to be measured and hold
down the measurement button(8).
ðThe SCAN indication(21) appears on the display. The
device performs a measurement.
ðThe currently measured value is indicated.
3. Let go of the measurement button(8) again.
ðThe HOLD indication(20) appears on the display. The
device stops measuring.
ðThe last value measured is shown.
Measuring with temperature probe
1. Press the temperature probe lock(3) and fold out the
temperature probe(4).
2. Insert the temperature probe(4) into the object to be
measured by approx. 1 cm.
3. Switch the device on and select the temperature probe
measuring mode.
4. Press the MEAS button(5).
ðThe currently measured value is indicated.
Note
The temperature probe is not suitable as an ice pick
and should never be pricked into frozen objects
forcefully to prevent damages to the device.
Setting the timer
The device allows you to set a timer. After the set time has
passed, a beep is emitted for 30 seconds.
Please proceed as follows to set the timer:
1. Press the TIMER button(6) to open the timer menu.
2. The timer period is displayed.
3. Press and hold the TIMER button(6) for 2 seconds to
switch between seconds, minutes and hours.
ðThe currently selected time format flashes.
4. Press and hold the SET button(2) to set the corresponding
value.
5. Press the measurement button(8) to start the timer.
ðThe timer starts and remains active in the background,
even if you switch to another menu or the device turns
off because of non-use.
ðAfter the set time has passed, a beep is emitted for
30 seconds. Press any button to switch off the beep.
The device switches off after approx. 20 seconds of non-use.
Changing the unit °C / °F indication
The default setting for the temperature unit is °C.
Please proceed as follows to change the temperature unit at the
device:
1. Press the SET button(2) to change the unit.
ðThe currently selected unit °C or °F will be indicated in
the temperature unit indication(12) of the display(1).
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec BP5F bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec BP5F in de taal/talen: Engels als bijlage per email.

De handleiding is 0,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Trotec BP5F

Trotec BP5F Gebruiksaanwijzing - Nederlands - 8 pagina's

Trotec BP5F Gebruiksaanwijzing - Deutsch - 8 pagina's

Trotec BP5F Gebruiksaanwijzing - Français - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info