753934
8
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
8 EN
laser distance measuring device BD 11
Carrying out single distance measurement
1. Briefly press the Switch-on/ measurement button(7) to
activate the laser if it is switched off.
2. Point the laser at the target area.
3. Briefly press the Switch-on/ measurement button(7)
again to perform a distance measurement.
ðThe measured value is displayed in the lower
measurement value display(20) immediately.
Adding/ subtracting measured values
1. Carry out a single distance measurement.
ðThe measured value is indicated on the display.
2. To add a measured value, briefly press the Plus/ minus
button(8) one time.
3. To subtract a measured value, briefly press the Plus/
minus button(8) twice.
4. Press the Switch-on/ measurement button(7) to
determine the next measured value.
ðThe overall result will be indicated in the lower
measurement value display(20). The individual
measured values will be indicated in the upper
measurement value displays(17).
Performing an area measurement
1. Briefly press the Function button(10) one time.
ðThe symbol for area measurement appears on the
display.
2. Briefly press the Switch-on/ measurement button(7) to
carry out the first measurement (e.g.length).
ðThe measured value is indicated in the upper
measurement value display(17).
3. Briefly press the Switch-on/ measurement button(7)
again to carry out the second measurement (e.g.width).
ðUpon pressing the Switch-on/ measurement button(7)
for the second time the device calculates the area and
displays this value in the lower measurement value
display(20). The most recently measured value will be
indicated in the upper measurement value display(17).
Performing a volume measurement
1. Briefly press the Function button(10) twice.
ðThe symbol for volume measurement appears on
the display.
ðThe side to be measured is indicated by red arrows in
the measurement value display.
2. Briefly press the Switch-on/ measurement button(7) to
carry out the first measurement (e.g.length).
ðThe measured value is displayed in the upper
measurement value display(17).
3. Briefly press the Switch-on/ measurement button(7)
again to carry out the second measurement (e.g.width).
ðThe measured value is additionally displayed in the
upper measurement value display(17).
4. Briefly press the Switch-on/ measurement button(7)
again to carry out the third measurement (e.g.height).
ðThe measured value is additionally displayed in the
upper measurement value display(17).
ðUpon pressing the Switch-on/ measurement button(7)
for the third time the device independently calculates
the volume and displays this value in the lower
measurement value display(20).
Performing a non-stop/ min and max measurement
Use the non-stop measuring function to correlate
measurements e.g. with construction drawings. With this
measurement method the device can be moved closer toward
the target with the measured value being recalculated roughly
every 0.5seconds. The corresponding maximum and minimum
measured values are displayed in the first and second line of the
upper measurement value display(17) respectively.
For instance, you can direct the laser beam at a wall and then
retreat from it step by step. Keep reading the measured values
until the desired distance is achieved.
1. Press and hold the Switch-on/ measurement button(7) for
approx.2s.
ðThe indications , and Δ(13) appear on the
display.
2. With reference to the target point, move the device slowly
back and forth as well as up and down (e.g.in a corner).
3. Briefly press the Switch-on/ measurement button(7) to
terminate the non-stop measurement.
ðThe maximum and minimum measured values and the
differenceΔ(13) between these two are indicated on
the display. Additionally, the last measured value will be
displayed in the lower measurement value display(20).
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trotec BD11 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trotec BD11 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Trotec BD11

Trotec BD11 Gebruiksaanwijzing - Nederlands - 12 pagina's

Trotec BD11 Gebruiksaanwijzing - Deutsch - 12 pagina's

Trotec BD11 Gebruiksaanwijzing - Français - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info