817491
199
Verklein
Vergroot
Pagina terug
1/376
Pagina verder
English – 3
Fitting
uDeactivate and remove the on-board computer when
fitting or working on the holder. This will avoid malfunc-
tions/improper use.
uDeactivate and remove the on-board computer when
fitting or removing the securing screw. This will avoid
malfunctions/improper use.
Inserting and removing the on-board computer
(seefiguresA–B)
To insert the on-board computer(5), first fit the lower part
into the holder(4) and then press it forward until you can
feel the on-board computer engage. Ensure that the on-
board computer is firmly engaged.
To remove the on-board computer(5), press the release
mechanism(9) and remove the on-board computer up-
wards.
uRemove the on-board computer when you park the
eBike.
It is possible to block the release mechanism with a screw.
To do so, remove the holder(4) from the handlebars. Place
the on-board computer in the holder. Screw the enclosed
locking screw(18) (M3 thread, 5mm long) from below into
the thread provided in the holder. Fit the holder back onto
the handlebars.
Please note: The locking screw is not designed to prevent
theft.
Operation
Starting Operation of the eBike
Requirements
The eBike can only be activated when the following require-
ments are met:
A sufficiently charged eBike battery is inserted (see oper-
ating instructions for the eBike battery).
The on-board computer is properly fitted in the holder.
The internal battery of the on-board computer must be
sufficiently charged.
Switching the eBike On and Off
The following options are available for switching on the
eBike:
Once the on-board computer and the eBike battery are
fitted, briefly press the on/off button(3) on the on-board
computer.
With the on-board computer inserted, press the on/off
button on the eBike battery (bicycle manufacturer-spe-
cific solutions are possible when there is no access to the
eBike battery on/off button; see the operating instruc-
tions from the bicycle manufacturer).
The drive is activated as soon as you start pedalling (except
if you are using the walk assistance function or if the assist-
ance level is set to OFF). The drive power varies depending
on the assistance level set.
As soon as you stop pedalling when in normal operation, or
as soon as you have reached a speed of25/45km/h, the
drive switches off the assistance. The drive is automatically
reactivated as soon you start pedalling again and the speed
is below25/45km/h.
The following options are available for switching off the
eBike:
Press and hold the on/off button(3) on the on-board
computer for at least 3seconds.
Switch off the eBike battery using its on/off button (bi-
cycle manufacturer-specific solutions are possible when
there is no access to the eBike battery on/off button; see
the bicycle manufacturer operating instructions).
Note: This puts theNyon (BUI350) into a standby mode.
Remove the on-board computer from its holder.
If no power is drawn from the drive for about10minutes
(e.g. because the eBike is not moving) and no button is
pressed on the on-board computer or the operating unit of
the eBike, the eBike will switch off automatically.
Nyon (BUI350) goes into standby mode as a result.
Standby Mode
You can put your on-board computer into a standby mode,
which enables the on-board computer and system to start up
more quickly.
Standby mode can be activated as follows:
To do this, press the on/off button(3) on the on-board
computer for at least 1second, but no longer than
3seconds.
Wait 10minutes until the system switches off.
Switch the eBike battery off using the on/off button on
the eBike battery.
Pressing the on/off button(3) on the on-board computer for
at least 1second ends standby mode.
Standby mode ends and the on-board computer automatic-
ally switches off if the state of charge of the on-board com-
puter's internal battery is less than 75%. In any case, the on-
board computer switches off at midnight (00:00) at the
latest.
IfNyon (BUI350) cannot be switched on or does not work
properly, press and hold the on/off button (for approx.
15seconds). This may correct the malfunction.
Power supply of the on-board computer
If the on-board computer is in the holder(4), a sufficiently
charged eBike battery is inserted into the eBike and the
eBike is switched on, then the on-board computer internal
battery is powered and charged by the eBike battery.
If the on-board computer is removed from the holder(4),
the power is supplied by the internal battery of the on-board
computer. The state of charge of the internal battery of the
on-board computer is displayed in the top left corner of the
statusbar.
If the internal battery of the on-board computer is running
low, a warning message appears on the display.
To charge the on-board computer's internal battery, slide the
on-board computer back onto the holder(4). Note that if
you do not charge the eBike battery straight away, the eBike
Bosch eBike Systems 1 270 020 BN2 | (27.02.2023)
199
199

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Trek-eBike-Systems-2024---Bosch

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Trek eBike Systems 2024 - Bosch bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Trek eBike Systems 2024 - Bosch in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 20,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info