465047
35
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
35
EN
Introduction Connections Playback Editing OthersFunction SetupRecording VHS Functions
Basic Setup /
TV View Operation
You can deactivate the periodical (Daily, Mon-Fri or Weekly)
timer recording temporarily.
1 In stop mode, press [TIMER PROG.].
2 Select the periodical timer recording
programme you want to skip using [K \ L], then
press [ENTER\OK].
3 Select “Programme Change” using [K \ L], then
press [ENTER\OK].
4 Move the cursor to the “Skip” field using
[{ \ B], then select “ON” using [K \ L] and
then press [ENTER\OK] to activate the setting.
• “” will be displayed on the left side of the timer
programme.
The setting will go back to “OFF” after the programme is
skipped once.
On the front panel:
Press [STOP C].
On the remote control:
1Press [STOPC].
2 Select “Yes” using [K \ L], then press
[ENTER\OK].
The error number appears on “Timer Programming” list.
The error programme will be displayed in gray with an error
number.
The error numbers indicate:
Timer programme with an error number will be cleared once
the entry screen for the programme is displayed.
If there is a power failure or the unit is unplugged for more
than 30 seconds, the clock setting and all timer settings will
be lost.
If a disc is not inserted or if a inserted disc is not recordable
(finalised DVD-RW/-R, finalised DVD+R, a fully recorded
disc, etc.), the unit will perform the alternate recording to the
HDD. (See page 34.)
When a timer recording is completed, the unit will ask you
whether to turn off the unit if there is no timer recording which
starts within 4 minutes, except under conditions listed below.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
The unit will be turned off automatically if you select “Yes” or
if you do not reply in 1 minute.
When the programmed starting and ending time are earlier
than the current time, the setting will not be accepted.
The audio language which is selected in the “DVB Setting”
will be recorded for digital TV broadcasting.
Timer recording whose recording time exceeds 12 hours
cannot be made.
It is prohibited to turn off the unit from 4 minutes before the
programmed starting time.
It is prohibited to change channel from 15 seconds before
the programmed starting time.
[REC I] does not work from 2 minutes before the
programmed starting time. If it comes to 2 minutes before
the starting time during regular or one-touch timer recording,
the recording in progress will be stopped.
Playback of DVD/CD is prohibited from 2 minutes before the
programmed starting time when the recording media is DVD.
If it comes to 2 minutes before the programmed starting time
during DVD/CD playback, the playback will be stopped.
When 2 or more programmes are overlapped, “Timer
programme overlapped” appears, and the overlapped
programme will be displayed in blue. To correct the timer
programme refer to “Checking, Cancelling or Correcting the
Timer Programming Information” on page 34.
If the Start time is earlier and the End time is later than the
current time, the recording will start immediately after you
press [ENTER\OK] at step
10 on page 34.
As to the timer recording in progress (which is shown in red
in the timer programme list), you only can edit the end time.
The changes made during recording will be recognised as
only specific to that recording in progress and it will not
affect the daily or the weekly recording setting.
Skip the Periodical Timer Recording
Stop the Timer Recording in Progress
If the Timer Programming did not
Complete Correctly
E1–E22, E37–E39 Recording error
E23–E24 Unrecordable disc
E25/E51 Copy prohibited programme
Cannot record because of the NTSC /
PAL-60 signal is received.
E26–E28 Copy prohibited programme
E29 Disc protected
E30 Disc full
E31 Already recorded 99 titles (video mode)
E32 Already recorded 99 titles (VR mode)
E33 Already recorded 999 chapters
E34 No space for Control Information
E35 PCA (Power Calibration Area) full
E36 Already finalised video format disc
1/1
E40
03/12 7:00 9:00
1 BBC1
03/1210:00
Date Start End CH
Timer Programming
STTL
PDC
THU
New Programme
E40 There are some unrecorded parts due
to the overlapped timer programmes.
Recording did not start at the start
time.
E41 Power failure
E42 No disc
E43 Already 49 titles recorded (+VR mode)
E44 Already 254 chapters recorded (+VR
mode)
E45 Copy prohibited programme
E46 It is impossible to record additionally on
a disc recorded by other units when
setting “Make Recording Compatible” to
“OFF”. (+VR mode)
E47 Already 600 titles recorded on the HDD.
E49–E50 HDD recording is cancelled due to the
insufficiency of the disc space on the
HDD.
Notes for the Timer Recording
E3TK2BD_EN.book Page 35 Thursday, April 16, 2009 12:00 PM
35

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Toshiba RDXV59 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Toshiba RDXV59 in de taal/talen: Engels als bijlage per email.

De handleiding is 11,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info