481594
19
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
18
Troubleshooting
Before requesting repair work
Check out the following points before requesting repair
work.
The scheduled operation is not performed even
though the set time is reached.
The scheduled operation has not been set.
A special holiday has been set.
The current clock time setting is blinking.
There has been a prolonged power outage. Re-set
the current clock time and current day of the week.
There is no response when the keys are operated.
The restriction has been set for the key operations.
Check the program.
The clock is not displayed when the power is turned
on.
The timer operation function or follower remote
controller has been set.
The setting for not displaying the clock has been
established.
Trouble diagnosis
<<Checks and inspections>>
When trouble has occurred in the air conditioner, an
inspection code and the number of the indoor unit
concerned blink on the numeric display.
Inspection codes are displayed only during operation.
If the display has gone off, check the trouble by
following the steps in “Checking the trouble history”
below.
<<Checking the trouble history>>
When trouble has occurred in the air conditioner, the
trouble history can be checked by following the steps
below. (Up to four events are stored in the trouble
history.)
The trouble history can be checked whether the air
conditioner is running or shut down.
1 Push the button (42) and button (43)
together for at least 4 seconds.
The numeric displays blink, and the servicing
display and inspect display light.
2 Push the TEMP or button (49).
Each time one of these buttons is pushed, the
trouble history events are displayed in numerical
order.
The “01” code on the numeric display indicates the
latest event, and “04” the earliest event.
* Do not push the button (41) since all the
trouble history events of the indoor units will be
deleted.
3 After checking the events, push the button
(43) to return to the original screen.
Concerning trouble occurring in the remote
controller
”, “ ” and “ blink at the same time.
This means that trouble has occurred on the remote
controller’s circuit board. Contact your dealer.
Normal air conditioner operations are still possible, but
no scheduled operations can be performed.
<Caution> If the problem persists even after
checking out the above points, stop operating the air
conditioner, set the ground fault interrupter to off, and
give the model number and details of the symptoms to
your dealer. Do NOT attempt to remedy the
problem yourself due to the dangers involved.
Inspection code Address of indoor unit
where the trouble has
occurred
Inspection code
Address of indoor unit where
the trouble has occurred
Numerical order of
trouble history events
19

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Toshiba-RBC-AMS41E

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Toshiba RBC-AMS41E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Toshiba RBC-AMS41E in de taal/talen: Engels als bijlage per email.

De handleiding is 2,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Toshiba RBC-AMS41E

Toshiba RBC-AMS41E Snelstart handleiding - English - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info