462249
3
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
Topcom Diablo 100/Twin/Triple/Quattro 3
1 Buttons (see folding page for the picture)
1. Numerical buttons
2.Off -hook button
3. Redial / Pause button
4. Flash R/ INT
5. Direct memory button M1
6.Paging button (to retrieve the handset)
7. Mute button
2Display
3 Installation (See picture on folding page)
4Battery low indication
When the battery is empty, the handset no longer carries out operations.
Full battery Empty battery
When you are in the middle of a conversation and the battery is almost empty, the handset will emit a warning signal. Place the handset
on the base unit to charge.
5Operation
5.1 Outgoing calls
5.1.1 Making a phone call or redialing one of the last 5 numbers
Enter the desired telephone number or press the Redial key to dial out one of the last 5 numbers Î press the scroll keys a
few times until the desired number appears on the display
Î Press the Off-hook button to dial out Î Press the on-hook button
when you want to terminate the call.
Note: Press the Mute button during a conversation. to deactivate or activate the microphone.
Note: You can set the volume between 1-5 by pressing the scroll button .
5.1.2 Call setup with dial preparation
Enter the desired telephone number. An incorrect number can be corrected by means of the Mute button. Î Press the Off-hook button
. The number will be dialled automatically.
Î Press the On-hook button when you want to terminate the call.
5.2 Incoming calls
When a call comes in, the handset will start to ring. Î Press the Off-hook button to answer the incoming call. To end the call press
the On-hook button .
5.3 Programming memory numbers
You can program 10 indirect numbers (of max. 24 digits) in the phone’s memory.
Press the Memory button short. The first entry will be shown on the display
Î Press and hold the Memory button until the -
icon appears on the display.
Î Enter the location (0-9) where you want to store the telephone number under. Î Enter the telephone
number you whish to store.
Î Press the Memory button again to confirm. Î You will hear a confirmation tone and the next entry will
appear. To leave the memory programming, press the on-hook button.
Note: If you wish to insert a pause, press the Redial/Pause button on the location where you want a pause of 3 sec.
5.4 Calling a memory number
Press the Memory button Î Scroll with the Up/Down keys to the entry you want to dial (0-9). Î Press the Off-hook button
. The memory number will be dialled a utomatically.
Î Press the On-hook button to terminate the call.
5.5 Direct access memory (Key 1,2,3 and M1)
The product has 3 locations (Key 1’, ‘2and 3’) where you can store a number under and dial it by pressing and holding one of these keys
in standby. The phone will automatically take the line and dial the number which is stored under this key. The number stored under key
1’ can also be dialed out by pressing the M1’-key shortly in standby.
5.5.1 Programing the direct memory keys
Press the Memory button short. Press and hold the Memory button until the -icon appears on the display. Press and hold one
of the 3 direct memory keys (Key 1,2 or 3) where you want to store the number under until Sx - _appears.
Î Enter the telephone number
you whish to store.
Î Press the Memory button again to confirm. Î You will hear a confirmation tone and the next entry will appear.
To leave the direct memory programming, press the On-hook button .
5.6 Paging
Press the Paging button on the base unit, the handset emits a ringing signal to help you find a lost handset. Press any key to stop the
ringing on all handsets.
5.7 Programming procedure
You can change the ring melodie, volume, day, time etc... by going into the program procedure: To go into the program procedure you
have to press and hold the Program button until the icon starts to flash.
Î Press the Program button again to change the first
setting. Each time you press the Program button you will confirm the previous setting and jump to the next setting:
You are online
INT = Internal communication
EXT = External communication
There are more digits on the left
There are more digits on the right
New numbers in call list Program mode
The keypad is locked - x - x = handset number
The antenna indicates the quality of reception
The antenna blinks when the handset is out of range!
/
Answered/Unanswered calls
Memory records are being retrieved or set up hh:mm Time: hh = hours, mm = minutes
ENGLISH
/P
/P
8. On hook button
9. Charge indicator/ On line (LED)
10. Call log/Scroll Up /
11. Scroll Down
12. Key lock
13. Program/Memory button /
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Topcom Diablo 100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Topcom Diablo 100 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info