466713
4
Verklein
Vergroot
Pagina terug
1/117
Pagina verder
3
ENGLISH 222-095001-03
TO SET DAILY ALARM
1. PRESS pusher “A” to bring up DAILY ALARM display: “ALARM” will appear
for 3 seconds followed by the current alarm setting time and time zone. The
ALARM mode symbol “AL” and the applicable time zone symbol “T1” or “T2”
alternate to give complete information.
2. PRESS pusher “D” to let time zone flash.
3. PRESS pusher “C” to select time zone.
4. PRESS pusher “A” to let hour flash.
5. PRESS pusher “C” to advance hour.
6. PRESS pusher “A” and “C” as above to adjust tens of minutes and minute.
7. PRESS pusher “D” to complete setting.
8. Alarm is automatically activated after setting S is displayed.
NOTE:
When the alarm sounds, it will beep for 20 seconds.
To stop the alarm beep, PRESS any pusher.
PRESS and HOLD pusher “C” for 2 seconds in setting mode, to activate
fast advance.
TO SET DAILY ALARM OR CHIME ON/OFF
1. PRESS pusher “A” to bring up DAILY ALARM display.
2. PRESS pusher “C” to activate or deactivate daily alarm and chime
accordingly.
NOTE:
a or C will appear or disappear according to daily alarm activation or
deactivation.
N orBwill appear or disappear according to chime activation or deactivation.
The alarm coordinates with the digital time not analog time.
The alarm will sound only if the digital time zone (T1 or T2) selected in the
Alarm set mode is currently displayed, as confirmed by the alarm symbol a
or C.
TO USE COUNTDOWN TIMER
SETTING MODE
HOUR MINUTE
1. PRESS pusher “A” to bring up COUNTDOWN TIMER display. “24 HR TR”
will appear.
2. PRESS pusher “D” to let hour flash.
3. PRESS pusher “C” to advance hour.
4. PRESS pusher “A” to set tens of minutes.
5. PRESS pusher “C” to advance tens of minutes.
6. PRESS pusher “A” and “C” as above to adjust minute.
7. PRESS pusher “D” to complete setting.
8. PRESS pusher “C” to start the timer.
9. PRESS pusher “D” to stop the timer.
10. PRESS pusher “D” again to resume timer to the preset time.
NOTE: When the timer counts down to zero it will beep for 20 seconds.
To stop the timer beep, PRESS any pusher.
“T” will appear to designate that the countdown timer is running.
Countdown time up to 24 hours.
PRESS and HOLD pusher “C” for 2 seconds in setting mode, to activate fast
advance.
TO USE CHRONOGRAPH FOR STANDARD MEASUREMENT:
OR
1. PRESS pusher “A” to bring up CHRONOGRAPH display; “CH LAP” or “CH
SPL” will appear.
2. PRESS pusher “C” to start timing.
3. PRESS pusher “D” to stop timing.
4. PRESS pusher “D” to reset.
TO USE CHRONOGRAPH FOR LAP OR SPLIT TIME MEASUREMENT:
1. PRESS pusher “A” to bring up CHRONOGRAPH display; “CH LAP” or
“CH SPL” will appear.
2. PRESS pusher “D” to select LAP or SPLIT.
3. PRESS pusher “C” to start timing.
4. PRESS pusher “C” to record the first Lap or Split time; digits will be frozen for
15 seconds; “L” or “S” will flash to indicate that the next Lap or Split time is
being recorded in the background.
5. PRESS pusher “A” to view the running display while the display is frozen.
6. PRESS pusher “C” to take another Lap or Split.
7. PRESS pusher “D” to stop.
8. PRESS pusher “D” again to reset.
NOTE: CHRONOGRAPH must be reset to zero to switch between LAP and
SPLIT.
Records time up to 24 hours and shows 1/100 of seconds for the first hour.
TO SET DUAL TIME:
HOUR MINUTE
1. PRESS pusher “A” to bring up DUAL TIME display. “T2” will appear beside
the dual time.
2. PRESS and HOLD pusher “D”; “Hold” will display until hour flashes.
3. PRESS pusher “C” to advance hour.
4. PRESS pusher “A” to let month flash.
5. PRESS pusher “C” to advance month.
6. PRESS pusher “A” and “C” as above to adjust date, day, and to set
12 / 24 hour format.
7. PRESS pusher “D” to complete setting.
NOTE: PRESS and hold pusher “C” for 2 seconds in setting mode to activate
fast advance.
NOTE:
1. While in setting of any mode, if no pusher is pressed for 90 seconds the
display will automatically return to TIME / CALENDAR mode.
2. While in any mode other than TIME / CALENDAR mode, whenever pusher
“C” or “D” is pressed, the next press of pusher “A” will automatically return
the display to TIME / CALENDAR mode.
MULTI-FUNCTION MODELS
CB
A
CROWN POSITION
NORMAL POSITION
Your watch has a normal large face display and three small faces displaying
date, day and 24-hour time.
TO SET THE DAY
1. Pull crown all the way out and turn CLOCKWISE until correct day appears.
2. Push crown in to restart.
NOTE: You must set day before setting time.
TO SET THE TIME
1. Pull crown all the way out and turn to correct time.
2. Push crown in to restart.
NOTE: 24-hour display will set automatically.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Timex W223 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Timex W223 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks als bijlage per email.

De handleiding is 8.9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Timex W223

Timex W223 Gebruiksaanwijzing - Nederlands - 277 pagina's

Timex W223 Gebruiksaanwijzing - Nederlands - 29 pagina's

Timex W223 Gebruiksaanwijzing - English, Français, Italiano - 277 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info