745833
1
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
ALICANTE, VALENCIA, ALMERIA
1
Installation and operation manual solid fuel fireplace insert
GB ALICANTE, VALENCIA, ALMERIA
tested according to the standard EN 13229
1. Installation manual
1.1 General
Fireplace insert for solid fuel is a single-shaft heating device which replaces the existing heating for short periods between seasons or
supports it in the cold seasons. Fireplace insert is designed for local heating. Fireplace insert can be installed in a normal environment.
This fireplace insert has been tested according the standard EN 13229 with fuels: wood and brown-coal briquettes. This fireplace insert
met the requirements of this standard.
All local regulations, including regulations relating to national and European standards have to be followed when installing the fireplace
insert.
Before mounting the fireplace insert, you have to inform the competent master chimney sweep who will inspect as expert the proper
connection of fireplace insert to the chimney. Fireplace insert must be installed on floorings that have corresponding loading capacity. By
installation, it is necessary to ensure sufficient space for cleaning of fire insert, flue and chimney. The fire insert must be closed during
operation, but also when not in operation, because otherwise it might significantly affect other devices connected to the chimney.
Combustion chamber is enclosed by sheet metal plate filled from inside with vermiculittes. In the bottom part of the combustion chamber,
there is the bed with cast-iron grate. There is an ash box under the grate. Stokers door are sealed with gasket. The door may be opened
only to add fuel. The stokers door are paned with highly heat-resistant glass-ceramic.
The smallest size of the front opening in the lining of fireplace insert is: width 600 mm and height 750 mm. Surface temperatures of the
lining can reach, depending on thermal resistance coefficient of the used construction material and its thickness, within the range between
30 and 80°C.
NOTE: when claiming or ordering spare parts always quote the name, type and serial number given on the data card.
1.2 Specifications
Nominal capacity:
8,0 kW
Nominal heating capacity efficiency:
wood = 82,3 %, lignite briquettes = 70,5 %
Operating chimney draft:
10 Pa
Height with legs
825 mm
Width
ALICANTE=588 mm, VALENCIA=590 mm, ALMERIA=600 mm
Depth
ALICANTE=392 mm, VALENCIA=423 mm, ALMERIA=385 mm
Draught shaft diameter:
Ø150 mm
Weight
ALICANTE=61 kg, VALENCIA=75 kg, ALMERIA=71 kg
Recommended fuel:
- dry hard wood: approximate heating value 15 MJ.kg
-1
- lignite briquettes: approximate heating capacity 20 ÷ 23 MJkg
-1
Approximate consumption of recommended fuel at nominal capacity:
- wood: 2.2 kg.hod.
-1
- lignite briquettes: 1.7 kg.hod.
-1
Heating capacity:
- favourable type of construction: 190 m³
- less favourable type of construction: 145 m³
- unfavourable type of construction: 98 m³
Applicable standards: EN 13229
1.3 Connection to the chimney
At installation comply with all corresponding project, safety and hygienic regulations.
Data to calculate the chimney (at the nominal thermal power):
Fuel
Brown-coal briquettes
Wood
Flue gas flow [g/s]
10,0
6,1
Max. flue gas temperature behind exhaust throat [°C]
377
312
Min. blast draught at nominal thermal power [Pa]
10
10
The fireplace insert can be used to connect a multi-occupied chimney, which means that to the chimney with the fire insert connected,
we can connect more devices.
Before connecting the fireplace insert, make sure there is sufficient blast in the chimney. Flame of a burning paper or candle should be
sucked into the chimney opening. The fireplace insert should be attached to the chimney flue in the shortest direction.
The fireplace insert should be attached to the chimney flue always with the consent of competent chimney sweeper office in compliance
with STN 73 4210 and STN 73 4201.
If the fireplace insert cannot be attached to the chimney flue directly, the flue involved should be the shortest possible and ascend towards
the chimney. Flues can be of maximum 1,5 m length. In any case, it is necessary to ensure smoke tubes and bends, mounted on exhaust
throat, against getting loose by a pin. Smoke tubes and bends must be attached firm and tight to the fireplace insert and plugged into
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thorma Almeria bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thorma Almeria in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,72 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info