658790
10
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
6
WARNING: The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used, we recommend
using (e.g. NiMH) types with low self-discharge to ensure long time
operation of remote control.
2.7 Using the remote control
Obr. 5
To use the remote control, point it towards the front of the digital receiver. The remote control has a
range of up to5 metres from the receiver, if properly aligned towards the IR eye on the front panel.
NOTE: The remote control will not operate if its path is blocked or affected by
bright/stroboscopic light.
3.0 CONNECTIONS
3.1 Basic connection via HDMI or SCART
Obr. 6.
a) Connect the LNB or Monoblock for ASTRA 19.2 /ASTRA 23.5 of your satellite antenna to the
SAT IN connector of your receiver using a good quality coax cable and suitable ‘F-connector
plugs.
b) Connect one end of a good quality HDMI cable to the HDMI connector of your receiver and
the other end to the HDMI input of your TV set.
c) Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
Optional: If your TV set doesn’t have an HDMI connector you can use the SCART connection instead.
In such case connect one end of a good quality SCART cable to the TV SCART of your receiver and
the other end to the SCART input of your TV set.
3.2 Connecting to multiple xed antennas
Obr. 7.
a) Connect the LNBs of your xed antenna to the desired inputs of a DiSEqC 1.0 switch using a
good quality coaxial cable and suitable ‘F-connectors’.
b) Connect the output or “to receiver” output of the DiSEqC 1.0 switch to the SAT IN connector
on your receiver using a good quality coaxial cable and suitable ‘F-connectors’.
c) Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
3.3 Connecting to your motorised dish via DiSEqC 1.2 or GOTO-X
Obr. 8
Another possibility for watching programmes from multiple satellites is by mounting a dish to a
motorized DiSEqC 1.2 or GOTO-X positioner. For the correct setup and mounting of your motorised
dish we recommend referring to the advice of a professional satellite equipment installer to ensure
correct alignment and function. Please ensure that all connections are tting well and are correctly
assembled, then you only need to connect the “OUT” connector of your positioner to the SAT IN
connector on the rear side of your receiver.
3.4 Extended connections for your home entertainment
Obr. 9
a) Connect one end of a good quality coaxial audio cable to the S/PDIF output of your receiver
and the other end to the coaxial audio input of your home theatre set, amplier or any other
device supporting digital audio.
b) Connect your USB 2.0 storage device to this connector by using a good quality USB cable or
insert the device directly.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thomson THS815 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thomson THS815 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info