648194
91
Verklein
Vergroot
Pagina terug
1/94
Pagina verder
User’s manual User’s manual
GB
89
12.1.2 - The WIRE PILOT programme
By default, the programme mode on every day of the week is the external programme, the
one responding to the “pilot wire” order (FP) sent by the centralised external programming.
Using this, if your device is connected to a centralised programming installing, you have
no manipulation to be made other than to put yourself in Prog mode.
Press on key
Equilibrium
Set : D/H/Min
Setting appears on the screen.
Press once on key
OK
Set : Prog
Prog Setting appears.
Validate by
.
Press on keys
or
OK
PROG: Central.
PROG : FP displayed on screen.
Validate by
.
To leave menu, press
on key
Equilibrium
Day Hour
Return to rest screen.
To activate the Prog
mode, press several
times on the right
or left hand
movement keys until
the selection arrow is
on Prog mode.
OK
The mode selection ashes
above the mode during selection.
13 - IF YOU HAVE A LOAD SHEDDING
If your installing includes a consumption reducer, this can alternatively cut the heating
radiators (depending on your contract with your energy supplier).
Caution, A load shedding system by a power supply cut is incompatible with our radiators
because it damages the thermostat. During load shedding periods, your radiator will
display « Load shedding ». It then returns to its initial operating mode.
During consumption reduction periods, your radiator will display “Consumption reduction”.
It then goes back to its initial operating mode.
14 - MAINTENANCE
Do not perform any maintenance action before switching your equipment off by doing a
long press on the
button.
If you want to maintain the performances of your radiator, you will need to use a vacuum
cleaner or a brush to remove dust from the lower and upper radiator grills about twice
every year.
You can clean the radiator with a damp cloth; never use abrasive products or solvents.
Dirt can accumulate on the radiator grill in a polluted environment. This phenomenon is
related to the poor quality of ambient air. It is recommended that correct aeration of the
room (ventilation, air intake, etc.), and cleanliness of the air should be veried if this arises.
Such dirt will invalidate the radiator replacement guarantee.
15 - IF A PROBLEM OCCURS
Problem encountered Check to be made
The radiator does not
heat
If you are in programming, make sure that the program is in
COMFORT mode.
Make sure that the circuit breakers of the installation are
closed or that the load shedder (if you have one) has not
switched the heating off (see part 13 "If you have a load
shedding).
Check the air temperature in the room; if it is higher than
the set temperature, the heating pictogram will not come on
and the radiator will not heat.
The radiator heats all
the time
Check that the radiator is not located in a draft, and that the
temperature setting has not been modied.
Equateur2_1880-1585_interieur.indd 89 18/06/12 06:23
91

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thermor Equateur 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thermor Equateur 2 in de taal/talen: Engels, Frans als bijlage per email.

De handleiding is 6,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info