536957
16
Verklein
Vergroot
Pagina terug
1/19
Pagina verder
20
USERS GUIDE
20
USERS GUIDE
15
USERS GUIDE
20
NeverleavetheH2OMOPX5unattendedwhilepluggedin.
For Best Results:
1) Sweep or vacuum floor prior to using the H2O MOP X5.
2) To avoid puddling of water, the Microfiber Cloth must
be clean and dry for use. To replace the cleaning cloth,
proceed as follows: Let the cleaning cloth cool down,
remove cloth from unit, replace with a new Microfiber Cloth
(Optional Item) and continue use. Select low steam regulator
position.
3) To sanitize an area of your floor, leave the H2O MOP X5™
at high steam setting over the steam area for about 10 seconds,
but no longer than 15 seconds.
Do not carry out this procedure on heat and steam
sensitive floors.
Never steam at one spot for too long. This can cause floor
surface damage.
Do not put hands or feet under the steam mop. Unit gets very hot.
During use a pulsing noise may be heard indicating that the mop is producing
steam. This noise is normal.
There may be some minor “spitting” of water mixed with the steam. This is
also normal.
The force and heat of the steam may adversely affect certain materials. Always
check the suitability of using the steam mop on a surface by carrying out a
preliminary test on a hidden area.
Thane Direct and its affiliated companies assume no liability for personal injury or
property damage resulting from the misuse of the H2O MOP X5™, including the
failure to comply with the instructions contained in this User Guide or provided by
the manufacturer or distributor of the treated surface.
!
NOTICE
!
IMPORTANT
!
WARNING
!
Make sure that the H2O MOP X5™ is unplugged.
1) Fill the Water Tank with water. Please refer to the “HOW
TO USE THE H2O MOP X5™” section in this manual.
Attach either the round nylon brush or the round copper brush as
explained in the “How to assemble Hand-Held Steamer” section in
this manual.
2) Select one of the following Steam Regulator positions:
1 – Low, 2 – Medium, 3 – High or 4 – Hot Spray.
You can change the Steam Regulator position and
the steam output while operating the H2O MOP X5™.
3) Once the unit has been fully assembled and filled with water, plug in
the Power Cord into a grounded electrical outlet.
RED light - Power Indicator will indicate when power is on.
Power Switch ( O / I ) is in the OFF ( O ) position (higher position).
Wait for the Ready-to-Use indicator to turn Green - approximately 20 - 30 seconds.
GREEN light will turn on when the steam mop is ready for use.
When the Ready-to-Use indicator light turns green press the Power Switch ( O / I )
to the ON ( I ) position (lower position).
The Hand-Held Steamer will start
emitting steam.
To stop emitting steam, turn OFF the
unit by pressing the Power Switch ( O / I )
again. If the Power Switch ( O / I ) is
pressed (lower position) prior to the
Ready-to-Use light indicator turning
green, water from previous use will
not be heated and will be forced out
by present steam.
HOW TO USE HAND-HELD STEAMER
ON (I)
Position
(Lower)
OFF (O)
Position
(Higher)
Red - Power ON
Green - Ready to use
CAUTION
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Thane H2O mop X5 - KB-6622V bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Thane H2O mop X5 - KB-6622V in de taal/talen: Engels als bijlage per email.

De handleiding is 1,59 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Thane H2O mop X5 - KB-6622V

Thane H2O mop X5 - KB-6622V Gebruiksaanwijzing - Nederlands - 19 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info