9
CONNECTING POWER
Check that the mains voltage marked on the rating •
plate on the back panel is the same as the voltage in
your area.
Plug the mains plug into the wall socket. •
Switch the mains power on at the socket. •
The display will light briey with the legend ‘OFF’.
POWER CONTROL
Switching on the player:
Press the • button.
The player will switch on and the display will show the
legend ‘LOAD’. If a disc is loaded, it will start to play
automatically.
Switching o the player:
Press the • button.
The player will switch o and the display will light briey
with the legend ‘OFF’.
USING THE REMOTE HANDSET
Point the handset at the infrared receiving window of the
player, located on the front panel. The handset must be no
more than 3 metres from the player and at an angle of no
more than 30º for reliable operation. If handset operation
is erratic in sunlight, move the player into the shade.
REMOTE CONTROL AND FRONT PANEL OPERATION
The text of this instruction book describes functions that
are controlled by the remote control.
A standby button and three of the function buttons
are also duplicated on the front panel for convenient
operation when you are close to the unit.
GETTING STARTED
LOADING/REMOVING A DISC
Loading a disc:
Press the • button to open the disc tray.
Holding the disc by the edges, place the disc on the •
tray with the label uppermost.
Press the • button to close the disc loading tray.
The unit will read the disc and automatically start playing
the disc from the beginning.
Removing a disc:
Press the • button to open the disc loading tray.
Holding the disc by the edges, lift the disc o the •
loading tray and place it back in the case.
Press the • button to close the disc loading tray.
