MAINTENANCE - 2
CLEANING AND LUBRICATION
Disconnect the machine from the power supply by removing the plug from the
mains socket.
Remove the stitch plate: (Figure 1)
Turn the handwheel until the needle is fully raised. Open the hinged front cover and
unscrew the needle plate screw withe the screw driver.
Cleaning the feed dog: (Figure 2)
Remove the bobbin case and use the brush supplied to clean the whole area.
Cleaning and lubricating the hook: (Figure 3)
Remove the bobbin case.
Snap the two hook retaining arms (A) outwards.
Remove the hook race cover (B) and the hook (C) and clean withe a soft cloth.
Lubricate at the point (D) (1-2 drops) with sewing machine oil ONLY.
Turn the handwheel until the hook race (E) is in the left position.
Replace the hook (C).
Replace the hook race cover (B) and snap back the two hook retaining arms (A).
Insert the bobbin case and bobbin and replace the stitch plate.
Page 34
