English
5
English
CLEANING
Beds
If applicable, we recommend that you do not let the plush surface of your AeroBed
®
get wet. Repeated exposure to water or other liquids may cause damage to the
plush surface that will not be covered by your guarantee. Should liquid come in
contact with the plush surface, blot liquid dry and use a damp cloth to remove any
stain. Let surface air dry completely.
You may clean the PVC on your
AeroBed with a mild dishwashing detergent or
household cleaner. Do not use strong chemicals or other compounds. Allow your
bed to air dry completely after cleaning and before storing
AeroBed
®
Premier Cotton
Your AeroBedPremier Cotton is constructed from quality cotton laminated to
heavy-duty vinyl. For spot cleaning, use a clear liquid dish detergent without dye,
clean tap water and clean absorbent white cloth. Wet stained area thoroughly, gently
massage stained area with detergent. Blot the area to remove staining substance.
Rinse thoroughly and blot dry. Allow your bed to air dry completely after cleaning
and before storing.
Cover/Valance (if included)
The mattress cover and valance (if included) are made of 100% cotton fabric.
Machine wash in warm water with a mild soap or detergent. Tumble dry on LOW
HEAT. Remove immediately after drying.
AeroBed Premier Comfort: The mattress cover is made of a polyester Jacquard
fabric. Do not machine wash. Dry Clean Only.
TROUBLESHOOTING
Very rarely, your AeroBed may fail to inflate properly. Should this occur, please use
the following check list.
1. If your
AeroBed doesn’t appear to be inflating:
First, make sure the Quick Air Release Valve is closed and locked securely.
If the valve is open, close it by using 2 thumbs to push cover firmly into valve. Be
careful to avoid pushing valve cover to the right or left as it snaps into valve
opening.
2. If air leakage from the Quick Air Release Valve occurs:
Carefully inspect the soft round gasket on inside of Quick Air Release Valve
cover. Make sure there is no dirt or debris, cuts, nicks
or tears to the gasket.
If there is dirt or debris; clean and use. If cut, nicked or
torn, call our Customer Service Department or visit our
website to order a replacement part.
3. If trouble persists, please phone our Customer Service
Department for assistance: 00 800 00 20 20 00.
Monday through Friday, 8am to 10pm Greenwich Mean
Time
Email: info@thinkaero.co.uk
Or visit our website at : www.ThinkAero.co.uk
GUARANTEE
By this consumer guarantee, Aero Products International Ltd. guarantees the product to be free
from defects in materials and workmanship for the following periods: the pump and valve, two
(2) years from the date of purchase; the mattress one (1) year from the date of purchase. If
during this period of guarantee the product proves defective due to improper materials or
workmanship, Aero Products International Ltd. will without charge for labour or parts, repair or
replace the product or its defective parts upon the terms and conditions set out below, provided
that the product has been used for its purposes (as outlined in this manual) and operated
according to all instructions provided.
Conditions:
I. This guarantee will be granted only when the original invoice or sales receipt (indicating the
date of purchase, product type and dealer’s name) is presented together with the defective
product. Aero Products International Ltd. reserves the right to refuse free-of-charge
guarantee service if the above document cannot be presented or if the information
contained in it is incomplete or illegible.
II. This guarantee will not reimburse nor cover the damage resulting from adaptations or
adjustments which may be made to the product, without the prior written consent of Aero
Products International Ltd., in order to conform to the national or local technical or safety
standards in force in any country other than the ones for which the product was originally
designed and manufactured.
III. This guarantee will not apply if the type or serial number on the product has been altered,
deleted, removed or made illegible.
IV. This guarantee covers none of the following:
a. Periodic maintenance and repair or replacement of parts due to normal wear and tear;
b. Any adaptation or changes to upgrade the product from its normal purpose as
described in the instruction manual, without the prior written consent of Aero Products
International Ltd.;
c. Transport costs, home service transport cost and all risks of transporting relating
directly or indirectly to the guarantee of the product.
d. Damage resulting from:
1. Misuse, including but not limited to (a) failure to use the product for its normal
purpose or in accordance with Aero Products’ instructions on the proper use and
maintenance, and (b) installation or use of the product in a manner inconsistent
with the technical or safety standards in force in the country where it is used and
(c) improper or incorrect installation of the product;
2. Repair done by non-approved Service Agents or Dealers, or the customer
himself;
3. Accidents, lightning, water, fire, improper ventilation or any cause beyond the
control of Aero Products International Ltd.
V. Any part or parts removed will become the property of Aero Products International Ltd.; and
if replacement parts are fitted or the product replaced in its entirety, this will not extend the
period under the Guarantee.
VI. This guarantee does not affect the consumer’s statutory rights under applicable national
laws in force, nor the consumer’s rights against the dealer arising from their sales/purchase
contract.
All purchasers must obtain an authorisation from Aero Products International Ltd., before
returning a defective product. The product should be carefully packaged and delivered postage
or delivery charges prepaid.
©2005 Aero Products International Ltd., The Chapel, Archel Road,West Kensington, W14 9QH.
All rights reserved.
This product is covered under one or more of the following U.S. and/or foreign patents: U.S.
Pat. Nos. 4,977,633; 5,367,726; 6,237,621; 6,508,264; 6,755,208; AU 731613;
BR PI9710873-1-1; CH 97196557.9; DE 69024962.4; DE 69230797.4; EPC 0 487 641;
EPC 0 605 624; HK 1025374; JP 3419774; Singapore 61207; Taiwan 62301. Made in China.
PLEASE TURN TO BACK OF MANUAL FOR PRODUCT GUARANTEE CARD
4
