EN
FR
EL
PT
AR
FA
4
micropressure valve is aligned with the triangle on the lid and
firmly push down until it fits in place.
• Replace the inner removable lid by fitting the tab on the left
side into the slot on the lid, then push in the lid until it the tab
on the right clicks into place. The wider side of the seal must
be uppermost when fitting the lid.
Using your rice cooker
For all 3 functions
• Carefully wipe the outside of the bowl (especially the
bottom). Make sure that there are no foreign residues or
liquid underneath the bowl and on the hotplate – Fig.8.
• Place the bowl into the appliance –
Fig.9, making sure that
it is correctly positioned.
• Slightly rotate the bowl in both directions, so as to ensure
good contact between the bottom of the bowl and the
hotplate.
• Check that the condensation collector is correctly placed in
position, if not, please install it by pushing firmly into the
groove –
Fig.10.
• Close and lock the lid.
• Plug in the appliance.
• Do not switch on the appliance until all of the above stages
have been completed.
• Avoid to switch on the appliance with an empty cooking
bowl.
• Do not touch the heating plate when the product is plugged.
Rice Cooking
Measuring the ingredients -
Max capacity of the bowl
• The graduated markings on the inside of the bowl are given in
liters and cups, these are used for measuring the amount of
water when cooking rice – Fig.11.
• The plastic cup provided with your appliance is for measuring
rice and the table states the quantity of rice required for the
number of servings. 1 level measuring cup of rice weighs about
150 g.
• For best results, we recommend using ordinary rice rather than
"easy cook" type of rice which tends to give a stickier rice and
may adhere to the base.
• To cook only 1 cup of white rice (serves 2 small or 1 large
Never place your
hand on the steam
vent during cooking,
as there is a danger
of burns. Only use
the inner pot
provided with the
appliance. Do not
pour water or put
ingredients in the
appliance without
the bowl inside.
