722463
44
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
PROBLEMS POSSIBLES CAUSES SOLUTION
The lid does not close. There are foreign bodies between the
bowl and the heating plate.
Remove the bowl, check that the heating plate, central element and under
the bowl are clean. Also check that the central element can move around.
The lid open/close handle is not
correctly positioned.
Check that the open/close handle is completely open.
The metal plate and/or the tightening
screw are not properly installed or fully
tightened.
Check that the nut is fully tightened and that the notches on the rotating
inner part of the lid are correctly aligned with the notches on the rim of the
bowl and then try locking the lid closed. The nut must be fitted with the flat
side facing the metal plate.
The appliance does not
depressurise.
The ball cover is not in place. Let the appliance cool completely and then remove the metal plate and
correctly position the ball cover (fixed in the lock position).
The lid does not open
once the steam is
released.
The manometric rod is still in the high
position.
After ensuring that no more steam is released and that the appliance is
completely cold, insert a fine metal skewer into the hole located between the
open handle and the silencing valve. Be careful of hot steam being released
once the skewer is pushed in. When no more steam is released, try to open
the appliance.
The appliance does not
become pressurised.
Check that the seal, purple safety valve
and manometric rod are clean.
Clean your appliance by following the cleaning and maintenance instructions
in this book.
Check that the lid is locked and the
marking is properly aligned with
the closed padlock. Check that the
manometric rod can move around and
if it needs cleaning.
Clean the manometric rod as instructed in the Cleaning and Maintenance
section.
The decompression ball is not
positioned correctly or dirty.
Check that the ball is correctly positioned and that the cover is in the locked
position. Clean and dry the ball and its support.
ERROR CODES
Code 24: the pressure decreases while
pressure cooking.
Code 21 and 26: pressure fails to raise.
Add liquid to your recipe (water, stock or a liquid sauce) 50-100ml at a time
and re-start the recipe.
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tefal CY7038 - Cook 4 Me bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tefal CY7038 - Cook 4 Me in de taal/talen: Engels als bijlage per email.

De handleiding is 15,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info