640531
8
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
6
EN
1. SAFETY:
ATTENTION! When you use electrical machines,
you should always observe basic safety precau
-
tions to reduce the risk of re, electric shocks and
personal injuries.
- Do not leave the machine out in the rain.
- Do not use the machine in damp or wet places.
- Keep the work area well lit.
- Do not use the machine near ammable liquids or gas.
- Make sure the voltage and the frequency written on the
rating nameplate match those of the mains.
- Make sure the switch is not pressed down and blocked
before you plug the machine into the mains to prevent it
from starting up accidentally.
- Unplug the machine from the mains when it is not in use,
before you start any maintenance jobs and when you
replace any accessories (e.g. grinding wheel).
- Before you actually use the machine, make sure it is able
to work appropriately and efciently: check the integrity of
the grinding wheel guard in particular.
- Check the alignment and adherence of moving parts, make
sure nothing is broken, check the overall assembly and any
other conditions that may affect operation.
- The grinding wheel safety guards and any other parts dam
-
aged shall be repaired or replaced by a skilled technician,
unless specied otherwise in this manual.
- Have faulty switches replaced by a skilled technician.
- Keep anyone that is not involved in the job well away from
the work area, especially children. Do not let them touch
the machine or the extension lead.
- Wear safety goggles and gloves.
- Wear a face mask or dust mask if the process creates dust.
- Do not wear baggy clothing or jewellery, which could get
caught up in moving parts.
- Wear a protection cap to tie long hair back.
- Wear non-slip shoes when working outdoors.
- Always stand appropriately and balanced on both feet.
- Always keep your eyes on the job, without distraction. Use
your common sense and do not use the machine if you
are tired.
- Always make sure spanners and tools have been taken
off the machine before using it.
- Keep the work area clean and tidy. Untidy work areas and
benches could increase the risk of an accident
- Do not touch earthed surfaces with any part of your body.
- Always use the vise to rmly hold the chain to be sharp
-
ened. Never sharpen the chain while holding it with your
hands.
- Do not force the machine to work at a higher speed than
that envisaged.
- Never stop the grinding wheel with your hands, even after
the motor has been switched off.
- When using the machine outdoors, use extension leads
approved for such use and marked accordingly.
- Never pull on the power cable to unplug the machine from
the mains. Keep the cable away from heat, oil and sharp
edges.
- Do not use the machine if the switch does not switch on
or off.
- The use of accessories (e.g. grinding wheel) different from
those recommended by the manufacturer could cause
injuries.
- Do not tamper with the safety devices.
- Look after the machine with care.
- Follow the instructions when replacing accessories.
- Every now and again, visually check the machine cable
and have it repaired by a skilled technician if you should
notice any damages.
- Every now and again, visually check the extension leads
and replace them if damaged.
- Keep the operating handles dry, clean and free from oil
and grease.
- When the machine is not used, keep it in a dry and safe
place away from children’s reach.
- This electrical machine complies with related safety provi
-
sions. Repairs shall be carried out exclusively by a skilled
technician, using exclusively OEM spare parts, otherwise
whoever uses the machine could be in serious danger.
2. GENERAL INFORMATION
The manufacturer is not liable for damages in the following
cases:
- failed observance of the instructions given herein;
- use of the machine other than that described in the
“INTENDED USE” section;
- failed use in compliance with current standards on Health
& Safety at the workplace;
- Incorrect installation;
- lack of scheduled maintenance;
- modifications or jobs that are not authorized by the
manufacturer;
- use of non-original or inadequate spare parts;
- repairs that are not carried out by a skilled technician.
3. WARRANTY

    
    

The guarantee becomes void if:
a) the machine has been tampered with;
b) the machine has not been used according to this manual;
c) non-original parts, machines or grinding wheels have been
tted on the machine or other parts that are not authorized
by the manufacturer;
d) the machine has been powered at a voltage or frequency
different from that written in the rating nameplate.
4. USE AND CARE OF THE OWNER’S MANUAL
The characteristics and the information given in this manual
are merely indicative. The manufacturer reserves the right to
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Tecomec Speed Master bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Tecomec Speed Master in de taal/talen: Alle talen als bijlage per email.

De handleiding is 3,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info