486787
4
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
4
How to Install a New Satellite(Fixed Non-Motorized System)
Press the MENU button on the remote and press the OK button on Installation setup.
Press OK on satellite to display a Satellite List. To add a satellite, press the YELLOW( ) button
on the remote. Press the EXIT button on the remote to exit the list.
When the quality bar is at its highest level, press the RED( )button on the remote to scan the
satellite. You can see Search popup menu. Press OK button to search channels.
If you scan multi-satellites, Go to Auto Navigation menu.
How to Setup a Monoblock or DiSEqC Switch(Up to 4 LNBs / Dishes)
Press the MENU button on the remote and press the OK button on Installation setup.
Press OK on satellite to display a Satellite List. Select a Satellite(e.g. Hotbird 13E and Astra 19.2E)
and press the YELLOW( ) button on the remote for each Satellite to save, Press the EXIT button
on the remote to exit the list.
Go to DISEQC 1.0 for 4 DiSEqC Switch or DISEQC 1.1 for over 4 DiSEqC Switch.
(e.g. Hotbird 13E as Number 1 and Astra 19.2E as Number 2).
When the quality bar is at its highest level, press the RED( )button on the remote to scan the
satellite. You can see Search popup menu. Press OK button to search channels.
If the above installation was not successful, change the DiSEqC Switching number.
(e.g. Hotbird 13E as Number 2, Astra 19.2E as Number 1).
How to Setup a DiSEqC 1.2 Motorized System.
Press the MENU button on the remote and press the OK button on Installation setup.
Press OK on satellite to display a Satellite List. Select a Satellite(e.g. Hotbird 13E and Astra 19.2E)
and press the YELLOW button on the remote for each Satellite to save, Press the EXIT button on
the remote to exit the list.
Press the EXIT button again. Press OK on Motorized Setup. Press OK again to display a Satellite
List. Select a Satellite and press OK. Go to the Third line(DiSEqC Motor) and use the Left/Right
buttons on the remote to select DiSEqC 1.2.
Go to Move and press and hold the Left/Right buttons on the remote until you get a Signal Quality
of more than 40%. Go to Command type and select Save Position and press OK to save.
Press the RED( ) button on the remote to scan. Repeat the above for more satellites.
How to Setup a USALS Motorized System.
Press the MENU button on the remote and press the OK button on Installation setup.
Press OK on satellite to display a Satellite List. Select a Satellite(e.g. Hotbird 13E and Astra 19.2E)
and press the YELLOW( ) button on the remote for each Satellite to save, Press the EXIT button
on the remote to exit the list.
Press the EXIT button again. Press OK on Motorized Setup.
Press OK again to display a Satellite List. Select a Satellite and press OK.
Go to the Third line(DiSEqC Motor) and use the Left/Right buttons on the remote to select USALS.
Go to Position Setting and press OK. Then go to Longitude and Latitude and enter the coordinates
of where you live.(London's Longitude is 00.1 West, South of UK's Latitude is 51.5 North).
Press the EXIT button on the remote. Go to Command Type and select Go To Position and press
OK. Wait until the Signal Quality is more than 40% in the progress bar.
Press the RED( ) button on the remote to scan.
If the Signal Quality is below 40%, then the settings are incorrect and the Longitude needs to be
adjusted, for example : 00.2, 00.3, 00.4, 5/6/7/8/9 West or East.
The Latitude may also need to be adjusted. If you still have not got a signal, then the external
installation(dish,etc) needs to be adjusted.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Technomate TM-8000 HD bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Technomate TM-8000 HD in de taal/talen: Engels als bijlage per email.

De handleiding is 1,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info