562331
6
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
TOGGLING AND RESETTING THE INDOOR RECORDINGS
1. To toggle between the indoor current, minimum and maximum temperature
and humidity data and the times at which they were recorded, press the IN
key:
Once to show the minimum temperature and humidity values with time and
date recorded
Twice to show the maximum temperature and humidity values with time
and date recorded
Three times to return to the current time, date, temperature and humidity
levels.
Note: the Time/date information is only available for the MIN/MAX
temperature data.
2. To reset the minimum and maximum temperature and humidity data and
the times at which they were recorded, press the IN key continuously for
about 3 seconds. This will reset all minimum and maximum data recorded
to the current time, date, temperature and humidity. The min/max
temperatures and humidity recorded are of current time and they remain
unaffected by the time zone setting.
OUTDOOR TEMPERATURE
The fifth LCD section shows the outdoor temperature and a reception signal. A
number beside the temperature will also show if more than one transmitter is
used.
TOGGLING AND RESETTING THE OUTDOOR RECORDINGS:
1. To toggle between the outdoor current, minimum and maximum
temperature data and the times at which they were recorded, press the
OUT key:
Once to show the minimum temperature value with time and date recorded
Twice to show the maximum temperature value with time and date
recorded
Three times to return to the current time, date and temperature level
2. To toggle between transmitters, press the CH key:
Once to show transmitter 2
Twice to show transmitter 3
Three times to return to transmitter 1
Note: The transmitter number will only be displayed if there is more than
one transmitter detected.
3. To reset the minimum and maximum outdoor temperature data and the
times at which they were recorded, press the OUT key continuously for
about 3 seconds. This will reset all minimum and maximum data recorded
to the current time, date and temperature. The min/max temperatures
recorded are of current time and they remain unaffected by the time zone
setting.
Note: the MIN/MAX data for each transmitter needs to be reset separately.
TEMPERATURE TRANSMITTER
The outdoor temperature is measured and transmitted every 60 seconds.
The range of the Temperature transmitter may be affected by the temperature. At
cold temperatures the transmitting distance may be decreased. Please bear this
in mind when placing the transmitter.
433 MHz RECEPTION:
The Weather station should receive the temperature data within 15 minutes after
set-up. If the temperature data is not being received 15 minutes after setting up
(the display shows “---”), then please check the following points:
1. The distance of the Weather Station or transmitter should be at least 1.5
to 2 meters away from any interfering sources such as computer monitors
or TV sets.
2. Avoid placing the receiver onto or in the immediate proximity of metal
window frames.
Maximum Display
Outdoor reception
signal
3. Using other electrical products such as headphones or speakers operating
on the same signal frequency (433MHz) may prevent correct signal
transmission and reception.
Outdoor
Temperature
in °C or °F
Number showing
the transmitter unit
(only if there is
more than one
transmitter)
4. Neighbors using electrical devices operating on the 433 MHz signal
frequency can also cause interference.
Note:
When the 433MHz signal is received correctly, do not re-open the battery covers
of either the transmitter or Weather Station, as the batteries may spring free from
the contacts and force a false reset. Should this happen accidentally then reset all
units (see Setting up above) otherwise transmission problems may occur.
The transmission range is about 25 m from the transmitter to the Weather Station
(in open space). However, this depends on the surrounding environment and
interference levels. If no reception is possible despite the observation of these
factors, all system units have to be reset (see Setting up).
POSITIONING THE WEATHER STATION
The Weather Station comes attached with a removable table
stand, which provides the option of table standing or wall
mounting the unit. Before wall mounting, please check that the
outdoor temperature can be received from the desired locations.
To wall mount:
1. Fix a screw (not supplied) into the desired wall, leaving the
head extended out by about 5mm.
2. Remove the stand from the Weather Station by pulling it
away from the base and hang the station onto the screw.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Techno line WS7079S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Techno line WS7079S in de taal/talen: Engels als bijlage per email.

De handleiding is 0,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info