612603
2
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
RQT5559
2
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions
carefully.
System SB-CSS135
Speakers x 3 SB-AFC135
Please check and identify the supplied accessories.
Speaker set-up
Attach the rubber feet to the speaker
The 3 speakers are the same.
The 3 speakers can be set-up either standing or lying down. Attach
these rubber feet to prevent vibration causing the speakers to move
or fall over.
One sheet of 12 rubber feet is included. Use 3 or 4 feet per speaker.
Attaching to the wall
Rubber feet (included)
Screw (not included)
To attach vertically
To attach horizontally
Attach four rubber feet to each speaker, ensuring they do not cover
the holes.
The surface you attach the speakers to must be able to support over
10 k .
Attaching to speaker stands
Speaker stands (not included)
Plate thickness +7 to 10 mm
Attach the stands with these holes.
Ensure the following conditions are met when you purchase
your speaker stands.
Observe the diameter and length of the screws and the distance
between screws as shown in the diagram.
Screw; diameter: 5 mm, pitch: 0.8 mm, length: thickness of stand
plate plus between 7 and 10 mm.
Distance between the centers of the holes: 60 mm
The stands must be able to support over 10 k .
The stands must be stable even if the speakers are in a high posi-
tion.
Moving the brand badge
You can rotate the brand badge if you choose to set up the speakers
horizontally.
Rotate the badge to the required position.
Cher client
Nous vous remercions d’avoir arrêté votre choix sur cet appareil.
Pour en tirer un rendement optimal, lire attentivement le présent
manuel.
Chaîne SB-CSS135
Enceintes x 3 SB-AFC135
Vérifier la présence et l’état des pièces et accessoires suivants.
Installation des enceintes
Fixation des pieds de caoutchouc
Les 3 enceintes sont identiques.
Elles peuvent être placées soit à l’horizontale ou à la verticale. Fixer
les pieds de caoutchouc sur les enceintes pour prévenir toute vibra-
tion qui pourrait les faire basculer ou tomber.
Une feuille de 12 pieds est incluse avec les enceintes. Utiliser de 3
à 4 pieds par enceinte.
Installation au mur
Pieds de caoutchouc pour enceintes (fournis)
Vis (vendues séparément)
Fixation verticale
Fixation horizontale
Apposer quatre pieds de caoutchouc à chaque enceinte, en
s’assurant qu’ils ne recouvrent pas les orifices.
La paroi murale doit pouvoir supporter plus de 10 k .
Fixation des enceintes sur un support
Supports (vendus séparément)
Épaisseur du support : 7 à 10 mm
Fixer le support aux orifices à l’arrière de l’enceinte
Vérifier les points suivants avant d’acheter des supports pour
enceintes :
Le diamètre, la longueur des vis ainsi que la distance entre les vis
comme illustré au schéma.
Les vis doivent avoir un diamètre de 5 mm et un pas de 0,8 mm.
La longueur doit comprendre l’épaisseur du support plus 7 à 10 mm.
La distance entre chaque orifice doit être de 60 mm.
Les supports doivent pouvoir supporter plus de 10 k .
Les supports doivent être stables même lorsque les enceintes sont
placées en hauteur.
Déplacement du logotype
Lors d’installation à l’horizontale, le logotype peut être tourné afin
de se trouver dans le même sens que l’installation.
Orienter le logotype selon les besoins.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Technics SBCSS135 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Technics SBCSS135 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info